Megasat HD 900 Twin CI+ User Manual - English
ENGLISH
ENGLISH
06
07
1. LNB IN 13/18V 500mA Max
Connect the Satellite Dish LNB
2. LOOP OUT
Output the Dish LNB IN signal
3. VIDEO/AUDIO
RCA output for CVBS format
4. HDMI OUT
HDMI signal output
5. USB
USB 2.0 Host Port
6. RS-232
Connect to serial port of PC for software upgrade
7. Power Switch
To Turn ON or OFF the main power of this STB
8. S/PDIF
Digital Audio output via RCA connector
9. TV SCART
Connect to TV set with Scart Output via Scart cable
1. TV/R ..................................... Switch between TV and RADIO.
2. POWER ............................... Switch the receiver on or off.
3. MUTE ................................... Turn the sound On/Off.
4. HDMI ................................... Switch the TV type.
5. FORMAT ............................. Switch 4:3 & 16:9 Screen Formats.
6. TIME ..................................... Setup event timer.
7. SLEEP ................................... Setting the time for turning the receiver off
8. NUMERIC KEY (0~9) ... Change program or input number.
9. SUB ....................................... Showing Subtitle information if the channels contains.
10. EPG ....................................... Show the TV/Radio electronic program guide
11. FAV ........................................ Press to display favorite channel list you set before.
12. TXT........................................ Press to Display the current channel’s TELETEXT information
13. RECALL ............................... Press to show the previous viewed channel.
14. SAT ........................................ Show the scanned satellite list.
15. MENU .................................. Press to enter main menu or exit to live channel.
16. EXIT....................................... Exit current menu step by step.
17. CH +/- ................................. Change TV Channels.
18. VOL +/- .............................. Change volume in viewing mode.
19. OK ......................................... Confirm the highlighted menu item, Open the program list.
20. AUDIO ................................. Select or change the Audio.
21. PAUSE .................................. Pause and Freeze the picture.
22. ZOOM ................................. Zoom in current TV channel
23. INFO ..................................... Show the information of the current channel.
24. FIND ..................................... Quickly find channels
25. OPT
26. PAGE +/- ............................ Page up/down on menu.
27. F1 ........................................... Function key.
28. USB ....................................... Enter into USB menu, USB Device must be connected
29. ...................................... Fast forward.
30. ...................................... Fast backward.
31. ...................................... Start playing / Release pause.
32. ...................................... Stop recording.
33. ...................................... Play previous item.
34. ...................................... Play next item.
35. ...................................... Pause/time shift.
36. ...................................... Start recording.
7
9
6
1
1
2
2
3
4
5
8
2.2 Rear Panel
2.3 Remote Control Unit (RCU)