Megasat HD 900 Twin CI+ User Manual - English
ENGLISH
ENGLISH
14
15
4. Installation and Operation
4. Installation and Operation
D: Rename
You can change the satellite name in this
menu
4. Antenna Setup
In this menu, user can set up DISH set-
tings, and choose correct parameters are
important to have correct receiving abi-
lity.
A: LNB Type and LNB Power
Here you need to check the LNB frequen-
cy according to your antenna, set the
correct frequency or define yourself, and
keep LNB power to be 13/18V.
B: 22KHz
In case you are using two antennas con-
nected to a 22KHz tone switch box. You
can supply either 22KHz by setting “OFF”
to select antenna.
C: DiSEqC1.0 & DiSEqC1.1
If you connect antenna to DiSEqC Switch,
you need to specify the DiSEqC input to
which your selected satellite have been
configured.
5. Single Satellite Search
In this menu, user can make Single Satel-
lite search, and also can choose search
type, search mode. Etc..
6. Multi Satellite Search
In this menu, user can make Multi Satel-
lite search, however a DiSEqC switch or
Multi switch is needed for making a multi
satellite search.
7. TP LIST
If this menu you will find the transpon-
der list of selected satellite here. Press
the LEFT/RIGHT button can switch the TP
and SAT list. In this menu you can Add,
Edit, Delete, Transponder search, you can
input the transponder frequency, symbol
rate, and choose polarization (Ver, Hor)
In this menu you can set program edit
like delete, lock, rename, move and swap
the selected channel, set FAV and so on.
1. TV Channels
Here you can Select Channel, Delete
Channel, Skip Channel, Move Channel,
Lock Channel. Select TV Channels, you
will get this window.