N-Com BX4 PLUS User Instructions And Safety - page 17
BX4 PLUS
17
5.2.
N-Com Wizard
“N-Com Wizard” is the PC application that can be used to manage and
configure the BX4 PLUS system.
The programme can be downloaded from the Internet site www.n-com.it, in the
“Download” section. In order to use it, a helmet equipped with BX4 PLUS must be
connected to the PC, using the USB cable supplied with the system.
N-Com Wizard allows you to customize your BX4 PLUS, specifically:
Setting the system audio levels
Pre-set and manage your favourite radio stations
Update the device firmware
Turn on or off the Bike-to-Bike menu
Manage connections with other bikes
The programme includes an on-line guide that explains how it works (after installing it on
your PC, press F1 to display this guide).
5.3.
N-Com App
The N-Com system is pre-set for connection to the “N-Com App”, the Android
application used to configure and control the N-Com system directly from a
smartphone.
With the N-Com App, you can carry out most of the functions included in the N-Com Wizard
program or, alternatively, it can be used as a wireless Bluetooth keypad.
The N-Com APP can be downloaded free of charge from Google Play.
For additional details, please visit the website www.n-com.it
6. PAIRING UP BLUETOOTH DEVICES
In order for the BX4 PLUS system to be connected to another Bluetooth device, the
latter needs to be first paired up with the N-Com system.
The pairing up procedure is the same for all Bluetooth devices: mobile phones, MP3
Bluetooth players, satellite navigators, etc.
1.
Make sure the BX4 PLUS is turned off;
2.
Press “on” and keep it pressed (for more than 4 seconds), until the LEDs start to
flash quickly and you hear a sharp beep in the headset, indicating the “Pair-up
mode”;
3.
On the Bluetooth device, turn on the search for Bluetooth devices (refer to the
instructions manual of your device for the proper pairing up procedure, as it
varies depending on the brand and model of the device);
4.
After a few seconds, the mobile phone will display the name “N-Com X4 v.X.XX”,
followed by the manufacturer’s identification data;
5.
Select the N-Com device. If a password is requested, enter 0000 (four zeros);
6.
BX4 PLUS will confirm the pairing up by means of a tone in the headset, and
the LEDs will stop flashing;
7.
Turn off and on both the mobile phone and the BX4 PLUS to store the pairing
up data.