1. DL manuals
  2. N-Tron
  3. Switch
  4. 300
  5. Installation Manual

N-Tron 300 Installation Manual

Other manuals for 300: Installation Manual
Manual is about: Media Converter & Industrial Ethernet Switches

Summary of 300

  • Page 1

    300 series media converter & industrial ethernet switches installation guide.

  • Page 2: 302Mc-Xx

    (revised 2011-11-29) 2 industrial ethernet switch installation guide 302mc-xx 302mce-xx-yy 304tx 305fx-xx 305fxe-xx-yy 306tx 306fx2-xx 306fxe2-xx-yy 308tx where: xx = st or sc and yy = -15, -40, or -80

  • Page 3

    (revised 2011-11-29) 3 copyright, © n-tron corp., 2008 820 s. University blvd., suite 4e mobile, al 36609 usa all rights reserved. Reproduction, adaptation, or translation without prior written permission from n-tron corp. Is prohibited, except as allowed under copyright laws. Ethernet is a register...

  • Page 4: Safety Warnings

    (revised 2011-11-29) 4 safety warnings electrical safety warning: explosion hazard, do not disconnect while circuits is live unless area is known to be non- hazardous. Warning: disconnect the power cable before removing the enclosure top. Warning: do not operate the unit with the top cover removed. ...

  • Page 5

    (revised 2011-11-29) 5 hazardous location installation requirements 1. Warning: do not disconnect while circuit is live, unless area is known to be non-hazardous. 2. Warning: install only in accordance with local & national codes of authorities having jurisdiction. 3. Class i, div 2 installations re...

  • Page 6

    (revised 2011-11-29) 6 300 series industrial ethernet switches the 300 series unmanaged industrial ethernet switches support high speed layer 2 switching between ports. All n-tron 300 series switches are housed in a ruggedized steel enclosure, and provide category-5 compliant 10/100-baset connection...

  • Page 7

    (revised 2011-11-29) 7 package contents please make sure the ethernet switch package contains the following items: 1. 300 series unit 2. N-tron product cd contact your carrier if any items are damaged. Installation read the following warning before beginning the installation: warning fxe units conta...

  • Page 8

    (revised 2011-11-29) 8 din-rail mounting install the unit in a standard din-rail. Recess the unit to allow at least 5” of horizontal clearance for fiber optic cable bend radius (2” for tx models). To install the unit to 35mm industrial din- rail, place the top edge of the included mounting bracket o...

  • Page 9

    (revised 2011-11-29) 9 standard 19" racks. Front panel lnk link led for fiber optic ports tx fiber optic transmit ports rx fiber optic receive ports act activity led for fiber optic ports rj45 ports ports 1-4 auto sensing 10/100baset connections green led lights when power is connected note: each rj...

  • Page 10

    (revised 2011-11-29) 10 applying power (top view) unscrew & remove the dc voltage input plug from the top header. Install the dc power cables into the plug (observing polarity on unit). Plug the voltage input plug back into the top header. Tightening torque for the terminal block power plug is 0.22 ...

  • Page 11

    (revised 2011-11-29) 11 n-tron switch grounding techniques the grounding philosophy of any control system is an integral part of the design. N-tron switches are designed to be grounded, but the user has been given the flexibility to float the switch when required. The best noise immunity and emissio...

  • Page 12

    (revised 2011-11-29) 12 rj45 connector crimp specifications please reference the illustration below for your cat5 cable specifications:.

  • Page 13

    (revised 2011-11-29) 13 connecting the unit for 300 series fiber units, remove the dust cap from the fiber optic connectors and connect the fiber optic cables. For fiber optic ports, the tx port on the near station should be connected to the rx port of the far end station, and the rx port should be ...

  • Page 14

    (revised 2011-11-29) 14 key specifications physical 302mc 304tx 305fx 306fx2 306tx 308tx height: 2.97” 3.06” 3.46” 3.46” 3.06” 3.46” width: 2.01” 2.01” 2.01” 2.01” 2.01” 2.01” depth: 3.17” 3.38” 3.38” 3.38” 3.39” 3.38” weight: 0.75 lbs 0.75 lbs 0.75 lbs 0.75 lbs 0.75 lbs 0.75 lbs electrical input vo...

  • Page 15

    (revised 2011-11-29) 15 regulatory approvals safety: suitable for use in class i, division 2, groups a, b, c and d hazardous locations, or nonhazardous locations only. Emi: en61000-6-4, en55011 - class a fcc title 47, part 15, subpart b - class a ems: en61000-6-2 en61000-4-2 (esd) en61000-4-3 (rs) e...

  • Page 16

    (revised 2011-11-29) 16 n-tron limited warranty n-tron, corp. Warrants to the end user that this hardware product will be free from defects in workmanship and materials, under normal use and service, for the applicable warranty period from the date of purchase from n-tron or its authorized reseller....