Nac BlueNAC-3000 User Manual - page 3
BlueNAC-3000
®
–User Manual– English
3
2
3 4 *
1
MAIN FEATURES OF BLUENAC-3000RL
• Bluetooth
®
version 2.1
• Enable wireless communication between two headsets BlueNAC-3000 and a walkie-talkie or transceiver.
• It’s possible connect audio sources like audible warning device or GPS with optional aux audio connection.
• Transmission Control Priorities PILOTO-COPILOTO
• Voice messages to the headsets to make easy the control and operate the MENU.
• Power supply requirement from 12V to 24V.
• Portable version: include lithium ion battery with a range of up to 8 hours talking time and 150 hours in
standby mode.
• Software upgradeable via USB port.
USE OF DEVICE
Description and use front panel buttons
There are two types of pulsation for the keys operation
: normal short press or long press (≈ 3 seconds)
NORMAL Operation Mode
In normal operation mode, the buttons between the two Leds, (+ and -) are used to vary the way in which Pilot
and Copilot used the transmission (see TRANSMISSION MODES).
1. Key : Short press, PILOT Private Transmission mode.
2. Key : Short press, PILOT Priority Transmission mode.
Long press, Free Transmission mode.
3. USB connection to PC and battery charge.
4. Key On/Off : Long press
(≈ 3 seg), ON/OFF.
Long press
(≈ 8 seg), Pairing Mode.
* This key is not used in BN-3000RL portable.
SETUP MENU Mode
By pressing simultaneously the & for 3 seconds, you access the Settings menu. If the headsets are
linked and audio connection established, then listen on headphones the first menu
option with a synthesized voice saying "SOUNDS VOLUME”.
Pressing the On/Off Key (4) advances to the next menu item. Use the key or to increase or decrease
the level in each option.
0 Click: Volume of synthesized sounds and phrases. Hear “SOUNDS VOLUMEN” in the headsets.
1 Click: Volume of the auxiliary input (music or GPS). Hear “AUXILIARY VOLUMEN”
2 Click: Volume of the radio. Hear “RADIO VOLUMEN”
3 Click: Gain the radio microphone. Hear “RADIO MICROPHONE GAIN”
After 5 seconds without any action, automatically exits of MENU mode.