Nac BlueNAC-3000 User Manual - page 4
BlueNAC-3000
®
–User Manual– English
4
LEDs Indications
At power on, the LEDs indicate the configuration of the first 5 seconds. After this time show the current status
of the link (and the battery in the portable version).
TABLA A
During power on
Blue Led
Blink
Pilot priority transmission mode
Red Led
Blink
Private transmission mode (Copilot excluded)
Blue Led
&
Red Led
Blink alternately
Free transmission mode
After 5 seconds shows the status of the device
Blue Led
Fixed
Every second Flash
Double Flash per second
Does not bind any device
Linked with a device
Established voice connection
Red Led
Flicker
Fixed
Low battery
Dead battery
Blue Led
&
Red Led
Flash simultaneously
Flash alternately
Menu Mode
Pairing Mode / Sync
NOTE: If you only use a headset or motorbike-intercom BlueNAC-3000 in combination with
BN-
3000RL
, and for some reason it is setup as Co-pilot, you should bear in mind that radio transmission
may not operate properly, unless you configure the
BN-3000RL
to free transmission mode.
MENU MODE
ON/OFF
VOLUME UP
VOLUME DWN
Observations
Select the menu
item according
to the number
of keystrokes
By pressing UP & DWN simultaneously
for 3 seconds, to enter in MENU mode
Both LEDs flash
simultaneously.
After 5 seconds without
pressing any keys, it returns to
normal operation
0 click
(Just to enter in
MENU mode)
Sounds Volume
Increase
Sounds Volume
Decrease
Sounds Volume
1 clicks
Radio Volume
Increase
Radio Volume
Decrease
Radio Volume
OPERATION MODE
ON/OFF
VOLUME UP
VOLUME DWN
Observations
Long
press
Switch on
Long
press
Switch Off
By clicking one time
PILOT Priority transmission
You heard through the
headphones
"Priority Transmission"
Long press activates
free transmission mode
You heard through the
headphones
"Free Transmission"
By clicking one time
Private Transmission Mode
(Exclude the co-pilot of
transmission)
You heard through the
headphones
" Private Transmission "
During power on the
LEDs show the
selected transmission
mode according to
Table A