- DL manuals
- NAC Image Technology
- Digital Camera
- MEMRECAM GX-1 584032-2
- Quick Reference Manual
NAC Image Technology MEMRECAM GX-1 584032-2 Quick Reference Manual - page 21
21
J3
1
Ethernet Signal MDI 0+
2
Ethernet Signal MDI 0-
3
Ethernet Signal MDI 1+
4
Ethernet Signal MDI 1+
5
Ethernet Signal MDI 2+
6
Ethernet Signal MDI 2-
7
Ethernet Signal MDI 3+
8
Ethernet Signal MDI 3-
9 EST
IN
10 EST
GND
11
IRIG Signal IN
12 IRIG
Signal
GND
13
Trigger Signal IN A (Photo coupler anode, +current)
14
Trigger Signal IN C (Photo coupler cathode, -current)
15
Exposure Pulse Signal OUT
16
Exposure Pulse Signal GND
17
Power Control Signal IN
18
Power Control Signal GND
Summary of MEMRECAM GX-1 584032-2
Page 1
1 quick reference manual memrecam gx-1 october 5, 2007 nac image technology inc..
Page 2: Contents
2 contents 1. Configuration overview ・ standard system ・ basic options ・ other options 2. I/o connectors 3. Led status indicators 4. Connections ・ single camera operation ・ multi-camera operation 5. Operations ・ basic operation schematics ・ gx link operations ・ j-pad 3 operations 6. Specifications a...
Page 3: 1. Configuration Overview
3 1. Configuration overview 1.1 standard system memrecam gx-1, 2gb, color (584032-2) memrecam gx-1, 2gb, monochrome (584032-4) ・ 1 x digital high speed camera memrecam gx-1 ・ 1 x control software gx link ・ 1 x j1 i/o cable (for power input, trigger input, etc.) ・ 1 x j2 i/o cable (for viewfinder, j-...
Page 4
4 1.3 other options multi-camera network options ・ gx hub (584030--) ・ remote cable 3m (h12061-3) ・ remote cable 7.5m (h12061-5) ・ remote cable 15m (h12061-7) ・ remote cable 25m (h12061-8) ・ remote cable 50m (h12061x0) ・ remote cable 75m (h12061x1) ・ remote cable 100m (h12061x2) gx hub hi-g options ...
Page 5: 2. I/o Connectors
5 2. I/o connectors memrecam gx-1 has three i/o connectors at the back of the camera. Followings show locations and major usages of each i/o. Please refer to appendix b for details. J1: power ・ power input ・ trigger input (contact, ttl) ・ status signal outputs j2: vf j-pad ・ viewfinder ・ j-pad 3 ・ u...
Page 6: 3. Led Status Indicator
6 3. Led status indicator memrecam gx-1 indicates its status using five led’s at the back of the camera. This section will explain features and functions of the led status indicators. Location and layout status 1) ub: usb led status green an usb device is connected. Off no connection or power off. 2...
Page 7
7 3) cm: camera mode led status blue stop/ready mode: status just after boot up or completion of recording, or stop/still in playback. White view mode: the imager is outputting image signal while the last recording image data is kept in the memory. Magenta arm mode: the imager is outputting image si...
Page 8: 4. Connections
8 4. Connections single camera operation host pc 1000base-t switching hub m em recam cat5e or cat6 cable max.100m gx1 ac adapter * you can connect the gx1 to a laptop pc directly using a cat5e/cat6 cable. Local single camera operation (w/o pc) m em recam gx1 viewfinder usb memory / usb card reader a...
Page 9
9 multi-camera operation m em recam host pc 1000base-t switching hub gx-hub gx1 remote cable up to 100m up to 100m m em recam gx remote cable(copper) max.100m cat5e or cat6 cable max.100m gx1 m em recam gx-hub gx1 up to 100m m em recam gx1 gx-hub.
Page 10: 5. Operations
10 5. Operations 5.1 basic operation procedures power on boot up ready view arm triggered recording done download playback auto view mode power off memory backup.
Page 11
11 5.2 gx link (control s/w) operations refer to gx link manual for operations in detail. Click a camera button attach a camera (s) ready view arm triggered recording done download playback auto view mode boot up gx link gx link identifies all applicable cameras network settings at pc * ip address s...
Page 12
12 5.3 j-pad 3 operations 1) general j-pad 3 is an optional remote controller useable for the memrecam gx series. It allows you to operate most of the functions of the camera without a control pc (gx link). Important: settings in gx link (control software) are prior to settings in the camera. Theref...
Page 13
13 lock switch ・ settings can be locked by a slide switch at side of the j-pad to prevent mis-operation. 5) lcd spec: 128 x 64 dots, monochrome, backlight contents of display ・ status: mode, frame rate, frame size, shutter, trigger mode, id, scene, frame counter, time, payback range tool bar ・ recor...
Page 14
14 6) appearance.
Page 15
15 7) functions of keys a) setup keys menu enters menu for: ・ general setup ・ recording setup ・ system setup ends menu set sets the parameter up moves a cursor to upward down moves a cursor to downward left moves a cursor to left right moves a cursor to right b) mode keys stop stops playback. Stops ...
Page 16
16 c) direct setting keys following keys allow you to set essential parameters and functions directly as regards recording, playback and data download. Frm rate set key: sets frame rate. Shutter set key: sets shutter speed. Trig set key: sets trigger position. S.Set set key: sets a start frame in pl...
Page 17
17 d) combination key operations + jumps to the start frame in stop status. + jumps to the end frame in stop status. + + enters a maintenance menu setting for; ・ ntsc/pal ・ ip address ・ reset to default settings e) jog dial cw for upward, ccw for downward, push for set. Set cw ccw push.
Page 18
18 6. Specifications • sensor: 12-bit, 1.3m-pixel cmos sensor • frame rate: 50-200,000pps • resolution: 1,280 x 1,024pixels up to 2,000pps 640 x 480pixels up to 6,000pps 512 x 384pixels at 10,000pps * see appendix a for more details • electronic shutter: open to 3µ sec. * see appendix a for more det...
Page 19
19 -appendix a- frame rate, resolution, sensing area & exposure time frame rate (pps) resolution in largest or square format (pixels) sensing area (mm) max. Exposure (µ sec) min. Exposure (µ sec) setting step (µ sec) 100 1,280 x 1,024 27.78 x 22.22 9,996 6 1 or 2 250 1,280 x 1,024 27.78 x 22.22 3,99...
Page 20
20 -appendix b- j1 1 dc 24v in 2 dc return 3 est in 4 est gnd 5 trigger signal in (make contact/ttl) 6 trigger signal gnd 7 arm status out 8 arm status gnd 9 fault status out 10 fault status gnd j2 1 arm command in 2 gnd (arm command return) 3 usb vbus 4 usb d+ 5 usb d- 6 usb gnd 7 nc 8 nc 9 dc 24v ...
Page 21
21 j3 1 ethernet signal mdi 0+ 2 ethernet signal mdi 0- 3 ethernet signal mdi 1+ 4 ethernet signal mdi 1+ 5 ethernet signal mdi 2+ 6 ethernet signal mdi 2- 7 ethernet signal mdi 3+ 8 ethernet signal mdi 3- 9 est in 10 est gnd 11 irig signal in 12 irig signal gnd 13 trigger signal in a (photo coupler...
Page 22
22 -appendix c- dimensional drawing.
Page 23
23 mounting plate 6×φ6.4 172 2×3/8-16UNC φ4.3 36 50 38 1 0 0 7 8 8 80 80 1 0.