NAD C715 Owner's Manual - page 9
1 SPEAKERS: Connect the left and right terminals to the corresponding
loudspeakers. Make sure that the “+” (red) terminal and “-” (black)
terminal are connected to the corresponding “+” and “-” terminals of the
loudspeaker. Use extra care to ensure that no stray wires or strands cross
between posts or terminals at either end.
NOTES
• Usestrandedwireofatleast16-gauge(AWG);specializedspeakercable
maybevaluable(consultyourNADaudiospecialist).Connectionstothe
C715canbemadewithbanana-typeplugs,orusingbarewire,orpins,
bylooseningtheterminal’splasticnut,makingaclean,neatconnection,
andre-tighteningcarefully.Tominimizethedangerofshort-circuits,
ensurethatonly1/2-inchofexposedwireorpinisemployedin
connecting.
• Thisunitisdesignedtoproduceoptimumsoundqualitywhen
connectedtospeakerswithimpedanceswithinthereceiver’soperating
range.Pleasecheckthatspeakersareratedtobe6ohmsminimumper
speaker.
2 FM/AM/DABANTENNAINPUT: Connect the supplied lead-type
FM antenna to the FM antenna input. Extend the lead. Experiment freely
with your antenna placement and orientation until you get the clearest
sound and lowest background noise. Fix the antenna in the desired
position by using thumb tacks, push pins or any suitable means.
The AM loop antenna supplied with the C 715 (or a suitable
replacement) is required for AM reception. open the clip terminal
lever; insert the wire making sure to match the color-coded (white
and black) ends of the wire to that of the terminal and close the
lever ensuring that the lever locks the wire in place. Testing different
positions for the antenna may improve reception; vertical orientation
will usually produce the best results. Antenna proximity to large metal
objects (appliances, radiators) may impair reception, as will attempts to
lengthen the wire to the loop.
Connect the supplied F-type DAb antenna to the DAb antenna input.
3 OPTICALDIGITALOUT: Connect the oPTICAl DIGITAl oUT port to
the corresponding S/PDIF digital input of a compatible device such as
CD recorders, receivers, computer soundcard or other digital processors.
4 TAPEIN/OUT: Connections for analog recording and playback to an
audio tape recorder of any type. Using twin RCA-to-RCA leads, connect
the left and right “Audio output” of the tape machine to the C 715’s
TAPE IN sockets for playback and tape monitoring. Connect the left and
right “Audio Input” of the tape machine to C 715’s TAPE oUT sockets for
recording.
NOTE
TherewillbenooutputatTAPEOUTwhenTAPEisselected.Likewise,
therewillbenooutputatVIDEOOUTwhenVCRistheactivesource
input.Thispreventsfeedbackthroughtherecordingcomponentthereby
preventingpossibledamagetoyourspeakers.
5 VCRIN/OUT: VCR may be used with recording components such
as a cassette deck. Connect analog stereo audio from such source
components into the C715’s VCR IN. Connect the C 715’s VCR oUT to
the source components’ record-input. Note that VCR may freely be used
for play-only components, in which case the oUT jacks would remain
unconnected.
6 AUXIN: Input for additional line level input such as another CD player.
Use a twin RCA-to-RCA lead to connect the auxiliary unit’s left and right
“Audio output” to this input.
7 SUBWOOFEROUT: Connect this output to a powered (“active”)
subwoofer (or to a power amplifier channel driving a passive system).
8 ACLINECORD: Plug the AC power cord into a live AC wall socket.
Make sure all connections have been made before connecting to mains.
IDENTIFICATION OF CONTROLS
REARPANEL
ATTENTION!
PleasemakesurethattheC715ispoweredofforunpluggedbeforemakinganyconnections.Itisalsoadvisabletopowerdownorunplugallassociated
componentswhilemakingorbreakinganysignalorACpowerconnections.
8
7
6
5
4
1
3
2
9
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ