NAD CI980 Owner's Manual - page 10
OVERALL SPECIFICATIONS
Continuous output power into 8 Ω and 4 Ω (both channels driven)
>50 W (ref. rated THD, 20 Hz – 20 kHz)
Continuous output power into 8 Ω (Mono, Bridge mode)
>100 W (ref. 20 Hz - 20 kHz, <0.02 % THD)
Rated THD (250 mW to rated power, CCIF IMD, DIM 100)
<0.03 % (ref. 20 Hz - 20 kHz)
Clipping power
>155W (ref. 1 kHz, 8 ohms, 0.1% THD
Damping factor
>150 (ref. 8 ohms, 50 Hz and 1 kHz)
Input sensitivity
1.1V (ref. rated power)
Voltage gain
33 dB
Frequency response
±1 dB (ref. 20 Hz - 20 kHz)
Signal-to-noise ratio, A-weighted
>80 dB (ref. 1 W)
>100 dB (ref. 50 W)
Minimum input signal to trigger auto sense mode
>20 mV
Time to go to standby mode at no input signal (auto sense mode)
10 minutes
Rated power
600 W
Standby power
<0.5 W
DIMENSION AND WEIGHT
Unit dimension (W x H x D)
483 x 105 x 323 mm
19 1/16 x 4 3/16 x 12 3/4 inches
Shipping weight
7.1 kg (15.7 lbs)
NAD SHALL NOT BE HELD LIABLE FOR ANY TECHNICAL OR USER INTERFACE DISCREPANCIES IN THIS MANUAL.
THE CI 980 OWNER’S MANUAL MAY BE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. CHECK OUT WWW.NADELECTRONICS.COM FOR THE LATEST VERSION OF THE CI 980 OWNER’S MANUAL.
REFERENCE
SPECIFICATIONS
10
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ