® d3020 hybrid digital amplifier english por tuguÊs fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ owner’s manual.
Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...
25 battery disposal - when disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like...
Unpacking and setup what’s in the box packed with your d 3020 you will find: • detachable mains power cord • remote control with 3v cr2025 battery • toslink mini-adapter • four pieces of dome-shaped feet • quick setup guide save the packaging please save the box and all the packaging in which your d...
Identification of controls 1 o (standby) • with the corresponding end of the mains power cord connected to the ac mains input of the d 3020 and the plug connected to a mains power source, press o (standby) to switch on the d 3020 from standby mode. The standby indicator will turn from amber to brigh...
10 speakers • connect the right speaker to the terminals marked “r +” and “r-” ensuring that the “r+” is connected to the “+” terminal on your loudspeaker and the “r-” is connected to the loudspeaker’s “-” terminal. Connect the left speaker to the terminals marked “l +” and “l-” ensuring that the “l...
Remote control 1 on: switch d3020 from standby mode to operating mode. 2 off: switch d3020 to standby mode. 3 +/- : increase or decrease audio level. Release mute function. 4 t u : select source. 5 uj : temporarily mutes audio output or restores audio from mute mode. 6 tuner controls (not applicable...
Connect to bluetooth device pair bluetooth device with the unique device id of d3020 (d 3020 010dd3 in this example). Start playback of bluetooth device upon successful pairing. Feet installation guide the dome-shaped feet are supplied for optional installation. Install the feet as per suggested loc...
Audio specifications rated power at 8 ohms 30w ihf dynamic power 8 ohms 65w ihf dynamic power 4 ohms 105w ihf dynamic power 2 ohms 150w signal-to-noise ratio (a-weighted) ≥ 90 db channel separation (1 khz) ≥ 75db channel separation (10 khz) ≥ 65 db channel balance 0 ± 0.3 db frequency response (20 h...
Www.Nadelectronics.Com ©2014 nad electronics international a division of lenbrook industries limited all rights reserved. Nad and the nad logo are trademarks of nad electronics international, a division of lenbrook industries limited. No part of this publication may be reproduced, stored or transmit...
