NAD S100 Installation And Setup Instructions

Other manuals for S100: Owner's Manual

Manual is about: NAD ELECTRONICS Stereo Preamplifier Owner's Manual S100

Page of 4

Download

Bookmark us

S100

RIAA Phono Module

Owner’s Manual

Installation and set-up instructions

The NAD S100 RIAA Phono Module is a custom designed optional phono stage for the

NAD S100 pre-amplifier.

The module offers serveral settings for Moving Magnet (MM) and Moving Coil (MC) to

accommodate a wide range of cartridges. The module is factory-set at MC; 35dB gain;

47kohm. This setting will suit most high output Moving Coil (MC) cartridges.

NOTE:

Installation and set-up of the NAD S100 RIAA Phono Module must be left to your official

NAD dealer or qualified technicians. Do not attempt to install and/or change the settings

of the module yourself.

IMPORTANT NOTICE:

NAD can not accept any responsibility or held liable for the consequences of incorrect

installation of the S100 RIAA phono module. Incorrect installation may void warranty on

both the S100 RIAA phono module and the S100 pre-amplifier.

Page 1
S100 riaa phono module owner’s manual gb installation and set-up instructions the nad s100 riaa phono module is a custom designed optional phono stage for the nad s100 pre-amplifier. The module offers serveral settings for moving magnet (mm) and moving coil (mc) to accommodate a wide range of cartri...
Page 2
Installation and set-up instructions for the nad s100 riaa phono module the nad s100 riaa phono module is a custom designed, optional phono stage for the nad s100 pre-amplifier. The module offers several settings moving magnet (mm) and moving coil (mc) to accommodate a wide range of cartridges. The ...
Page 3
Once the lid is removed, two rows of connectors (2 x 8 pins each) can be seen. By placing jumpers over the various pairs of connectors different settings can be selected. The table below shows which settings are available. Place the jumpers as indicated in the corresponding figure. Figure 1 shows th...