NAD T785 Owner's Manual - page 17
ANALOGAUDIO
The T 785 has nine analog audio inputs including 7.1 input. These analog inputs - Audio 1, Audio 2,
Audio 3, Audio 4, Audio 5, Audio 6, Audio Front, Audio MP and 7.1 Input can be variably assigned to
each Source.
Scroll to “Analog Audio” and then press [ ] to select and assign an analog audio input to the particular
Source. There are three choices – Audio, 7.1 Input or Off.
When “Audio” is chosen, press [ ] and then [
] keys to select and assign the desired audio input
– 1 to 6, Front and MP.
Select “7.1 Input” to choose the audio signal fed to “7.1 Channel Input”. If “Off” is selected, no incoming
analog audio signal is selected by the particular Source.
NOTE
Anincomingdigitalsignalpresentattheassigneddigitalinputwillalwaystakeprecedenceoverthe
assignedanalogaudioinput,evenifbotharepresent.Tomaintaintheanalogaudioinputforthe
particularSource,select“Off”atthe“DigitalAudio”settingofthesame”Source”menu.
GAIN
Gain adjustment allows all sources to play back at the same volume so you don’t need to adjust the
volume every time a new source is selected. It is generally preferable to reduce the level of the loudest
source rather than making louder the softer sources.
Scroll to “Gain”, press [ ] and then [
] to step through the desired level from -12dB to 12dB.
DIGITALAUDIO
To take advantage of the T 785’s high performance surround and digital audio circuitry, it is advisable
that its Digital Audio inputs are selected.
There are three types of Digital Audio input for the T 785. These are HDMI, Optical and Coaxial digital inputs.
A fourth option is “Off” whereby no incoming digital audio signal is selected by the particular Source.
The desired digital audio input for a particular Source can be selected by scrolling to “Digital Audio”, press
[ ] and then [
] to step through the desired digital input source. After finalizing which type of Digital
Audio input is desired, press [ ] and then [
] again to select the specific Digital Audio input.
There are eleven Digital Audio inputs selectable for the T 785. They are the following
HDMI HDMI 1, HDMI 2, HDMI 3, HDMI 4
Optical Optical 1, Optical 2, Optical 3, Optical Front
Coaxial Coaxial 1, Coaxial 2, Coaxial 3
NOTE
Anincomingdigitalsignalpresentattheassigneddigitalinputwillalwaystakeprecedenceoverthe
assignedanalogaudioinput,evenifbotharepresent.Tomaintaintheanalogaudioinputforthe
particularSource,select“Off”atthe“DigitalAudio”settingofthesame“Source”menu.
VIDEO
There are four types of video input a particular Source could be assigned. These are HDMI, Component,
S-Video and Video inputs. A fifth option is “Off” wherein the particular Source is prompted not to select
any Video input.
Navigating through the Video input selections involve a combination of pressing [ ] and then [
]
to step through the selections. The following are the assignable Video inputs
HDMI HDMI 1, HDMI 2, HDMI 3, HDMI 4
Component Video Component 1, Component 2, Component 3
S-Video S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video 5, S-Video Front
Video Video 1, Video 2, Video 3, Video 4, Video 5, Video Front
NOTE
AnaudioinputandvideoinputshouldalwaysbeassociatedtoaselectedSourcesettingtoensureaudioandvideo
output.If“Off”isselectedforanyoftheAnalogAudio,VideoorDigitalAudiosettings,therewillbenocorresponding
audioorvideofortheassociatedSource.Forexample,iftheselectedVideosettingforaparticularSourceisHDMI1
andbothDigitalandAnalogAudioaresetto“Off”,onlyvideooutputwillbeavailablebutnoaudio.Ideally,when
theselectedVideoinputisHDMI1,itfollowsthattheDigitalAudioinputissettoHDMI1oranyofthedigitalinputs.
ReferalsototheQUICKSTARTsectionundertheINTRODUCTION–GETTINGSTARTEDpage.
OPERATION
USINGTHET785–SETUPMENU
17
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ