- DL manuals
- NAD
- Receiver
- VISO THREE
- Owner's Manual
NAD VISO THREE Owner's Manual
Summary of VISO THREE
Page 1
En g li sh po r tu g u Ês fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ owner’s manual ® viso three cd receiver.
Page 2
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point withi...
Page 3
Warning! The unit must not be exposed to dripping or splashing liquids, and liquid- filled objects such as vases or cups should not be placed on the unit. Caution changes or modifications to this equipment not expressly approved by nad electronics for compliance could void the user’s authority to op...
Page 4
Introduction table of contents important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 introduction getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 what’s in the box . . . . . . . . . . . . . . . . . ...
Page 5
What’s in the box packed with your viso three you will find • ipd 2 gift box incorporated with the following − nad ipd 2 dock for ipod − stereo rca and 3.5mm stereo jack patch cord − dock adapters − ipd 2 dr 1 remote control with 3v cr2025 battery − universal switching adaptor with interchangeable p...
Page 6
Identification of controls front panel 1 standby button • press this button to switch on the viso three from standby mode. The standby led indicator will turn from amber to blue. Pressing the standby button again turns the unit back to standby mode. • pressing the [open/close] button will also autom...
Page 7
6 remote sensor point the vr 3 remote control at the remote sensor and press the buttons. Do not expose the remote sensor of the viso three to a strong light source such as direct sunlight or illumination. If you do so, you may not be able to operate the viso three with the remote control. Distance:...
Page 8
Attention! Pleasemakesurethatthevisothreeispoweredofforunpluggedfromthemainspowersourcebeforemakinganyconnections.Itisalsoadvisableto powerdownorunplugallassociatedcomponentswhilemakingorbreakinganysignaloracpowerconnections. Identification of controls rear panel 1 4 3 2 5 6 7 8 9 10 12 11 230v vers...
Page 9
7 dab module input (230v version only) the viso three is compatible only with the nad dab adaptor module models db 1 or db 2. • plug-in the other end of the mini-din connector from the nad dab adaptor module output port into this socket. • with dab, you can receive cd-like quality programs without a...
Page 10
Identification of controls remote control 2 7 8 10 1 3, 4 6 9 5 12 11 using the vr 3 remote control the vr 3 remote control handset handles the key functions of the viso three. The vr 3 can also be used to directly command other nad products that respond to applicable common remote control codes. Th...
Page 11
8 vol • press [vol ] button to increase or decrease the loudness level. Release the button when the desired level is reached. • the vfd on the front panel will indicate the level set. For nad receivers, the vfd will also show “volume up” or “volume down” or “volume: _ _ db” (_ _ indicates the numeri...
Page 12
Tuner control (use with nad viso three tuner section and other compatible nad receiver, am/fm/dab tuner models) set the device selector to “tun” in order to gain access to these buttons. Refer to the corresponding labels printed in the remote control faceplate and their respective assigned buttons t...
Page 13
Library the vr 3 can store a different library of default nad codes for each of its device selector “pages.” if the original default library does not control your nad cd player, dvd player, or other component, follow the procedure below to change the library code. Refer as well to the table below fo...
Page 14
Selecting sources desired source can be selected by repeatedly pressing [ source ] to step through the following sources: internal cd player ipod am/fm/dab usb audio 1 audio 2 front then back to internal cd player the same source can be directly selected using the vr 3 remote control. 1 set vr 3’s d...
Page 15
Cd-r and cd-rw audio discs the viso three can playback cd-r or cd-rw audio discs that have been recorded on a computer or cd recorder. The quality of cd-r or cd-rw audio discs varies widely which may affect playability. Some factors that affect playability: • the quality of the disc itself. Generall...
Page 16
The viso three can play back mp3/wma files stored in a usb memory stick. The following are the viso three’s capabilities with respect to usb playability. Usb supplementary information maximum number of folders supported 99 maximum file in one folder 1024 maximum file in device 1024 maximum number of...
Page 17
The viso three’s internal am/fm tuner offers very high quality sound from radio broadcasts. The reception and sound quality will always be dependent to a degree however on the type of antenna(s) used as well as proximity to the broadcast origin, geography and weather conditions. About antennas conne...
Page 18
Automatic preset preset stations may also be programmed automatically for the entire fm (or am) band. 1 toggle the [am/fm/db] button to select fm (or am) band. 2 press and hold the [memory] button until the station frequency indication begins to increase. 3 release the button and note that the tuner...
Page 19
Operation listening to dab radio until now, analogue radio signals such as fm or am have been subject to numerous kinds of interference on their way from the transmitter to your radio. These problems were caused by mountains, high-rise buildings and weather conditions. With digital audio broadcast (...
Page 20
Dab tuner mode aside from “full scan” as already described above, pressing [tuner mode] will also present you with other options namely - local scan, station order, dynamic range, manual tune, prune list and dab reset. Use [ ] to step through these options. An asterisk (*) to the right of a menu opt...
Page 21
2 to select other channels, toggle [ ] to step through the channel list. Release [ ] when you have arrived at your desired channel. Press [enter] to tune the selected channel. • channel and frequency are shown in the lower line of the vfd. The number of “o” display at the upper line of the vfd indic...
Page 22
Information settings while listening to a dab broadcast, the type of information displayed in the lower line of the vfd can be varied. Toggle vr 3’s [info] button to step through the following display options: station name dls program type ensemble name time and date audio signal information channel...
Page 23
The viso three is equipped with a data port in the rear panel where an optional “nad ipd dock for ipod” (nad ipd) can be plugged in. With the nad ipd linking the viso three with your own ipod player, you can enjoy listening to your favorite songs and playlists. You can control your ipod player using...
Page 24
Control features use the following control buttons in navigating through the menu mode options. Since the vr 3 will be the primary controller in most cases, we will focus on remote-controlled operations. Note that for other nad ipd models (like nad ipd 2) that have remote control, below controls hav...
Page 25
Condition possible causes possible solutions no sound . • ac power unplugged. • check ac cable connection and outlet. • outlet has no power. • faulty/missing cables. • check cables. • mute on. • switch off mute. • speaker connections faulty. • check speaker connections. No sound from subwoofer . • s...
Page 26
Amplifer section continuous output power into 8 ohms >50 w (ref. Rated thd, both channels driven) rated thd signal/noise ratio >82 db (a-weighted, ref. 1 w) >92 db (a-weighted, ref. 50 w) frequency response 10 hz – 60 khz (ref. -3 db; 1 khz= 0 db) input sensitivity 280 mv (ref. Rated power) channel ...
Page 27
27 en g li sh po r tu g u Ês fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ.
Page 28
Www.Nadelectronics.Com ©2010 nad electronics international a division of lenbrook industries limited all rights reserved. Nad and the nad logo are trademarks of nad electronics international, a division of lenbrook industries limited. No part of this publication may be reproduced, stored or transmit...