1. DL manuals
  2. NAD
  3. Receiver
  4. VISO TWO
  5. Owner's Manual

NAD VISO TWO Owner's Manual

Other manuals for VISO TWO: Brochure
Manual is about: NAD VISO TWO: User Guide

Summary of VISO TWO

  • Page 1

    En g li sh fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ ® owner’s manual viso two dvd receiver.

  • Page 2

    Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...

  • Page 3

    19 damage requiring service - unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) when the power-supply cord or plug is damaged. B) if liquid has been spilled, or objects have fallen into the product. C) if the product has be...

  • Page 4

    Important information for uk customers donot cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. If, noneth...

  • Page 5

    Introduction table of contents thank you for choosing nad. The viso two dvd receiver is a technologically advanced and highly capable product — yet we have invested great effort in making it simple and easy to use. The viso two delivers a range of genuinely useful options for stereo listening, using...

  • Page 6

    Introduction about viso two though the viso two is among the most technically sophisticated dvd receivers, we worked hard to make it one of the most musically transparent home-theater components available as well; this is what we mean by nad’s “music first” design philosophy. Here are just few examp...

  • Page 7

    What’s in the box packed with your viso two you will find • an am loop antenna. • a fm ribbon-wire antenna with balun. • a removable ac cable (if you wish, any iec-standard ac cable of suitable wattage may be substituted). • the htr 6 remote control with 4 (four) aaa batteries. • this owner’s manual...

  • Page 8

    1 power button: press this button or the htr 6 remote’s [on] button to switch on the viso two. The standby led indicator will turn from amber to blue and illuminate the vfd. Pressing the power button again or htr 6’s [off] button turns the unit back to standby mode. Note that when you do choose to s...

  • Page 9

    11 tuner mode: in fm mode, this button will toggle between fm stereo and fm mono. Select fm mono (fm stereo and fm mute icons at vfd are extinguished) for stations that have too much interference or are too weak. In dab (european version only) or xm (north america version only) radio, this button en...

  • Page 10

    1 speakers: connect the left and right terminals to the corresponding loudspeakers. Each output’s “+” (red) terminal and “-” (black) terminal must be connected to the corresponding “+” and “-” terminals of the loudspeaker. Use extra care to ensure that no stray wires or strands cross between posts o...

  • Page 11

    9 hdmi out: connect the hdmi out to a hdtv or projector with hdmi input. Warning beforeconnectinganddisconnectingthehdmicable,boththe visotwoandtheancillarysourcemustbepoweredoffand unpluggedfromtheacoutlet.Failuretoobservethispracticemaycause permanentdamagetotheequipmentconnectedviathehdmisocket. ...

  • Page 12

    About the on-screen display (osd) the viso two employs a self-explanatory on-screen display “menu” that will appear on the connected video monitor/tv. These are required during the setup process (and are useful in day-to-day operation), so be sure to connect the monitor/tv before proceeding with set...

  • Page 13

    Muting the sound use the htr 6’s “mute” key to silence all channels completely (“mute” is displayed in the lower line of the vfd). Muting is always available regardless of the source or listening mode selections. Note adjustingthemaster-volumeviathehtr6orthefront-panelknob automaticallyreleasesthemu...

  • Page 14

    Audio setup menu listening mode the viso two offers distinct surround modes tailored for different types of recordings or program material. With a two-channel (stereo) source, the following listening modes can be selected: dolby® virtual speaker (dvs) dolby virtual speaker technology creates a highl...

  • Page 15

    Input settings input aside from the viso two’s internal dvd, the viso two is also equipped with the following audio/video source inputs - “cable/sat”, “vcr” (ipod) and “front” (front input on the front panel). The input becomes active whenever it is selected. Use [ ] select through dvd, cable/sat, v...

  • Page 16

    Video setup menu disc video format set format to select a picture size matching the aspect ratio of your tv/monitor. Select “pan scan 4:3” or “letter box 4:3” when a standard 4:3 tv is connected. Letter box 4:3 : displays a wide picture with bands on the upper and lower portions of the screen. Pan s...

  • Page 17

    Disc audio digital out set viso two’s “digital out” according to the type of audio system you use. Bitstream: select “bitstream” if you connect the viso two’s digital out jack to an amplifier or other equipment with a dolby digital, dts or mpeg decoder. Pcm: select when connected to a two-channel di...

  • Page 18

    Rating level (north america version only) some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the c...

  • Page 19

    About the viso two internal dvd player the viso two has exceptional playability. It has support for dvd-video, dvd-r/-rw/+r/+rw, dvd-a, svcd with or without pbc (play back control), vcd, divx, audio cd, cd-r/-rw and including recorded mp3, copyright- protected wma and jpeg files. Note youcannotplayb...

  • Page 20

    Repeat to repeat the playback of a particular track, file or chapter, press the viso two’s [repeat] key once. Pressing the same [repeat] key a second time will repeat all the tracks, files or title. Turn off repeat mode by pressing repeat button a third time. Depending on your desired repeat mode, t...

  • Page 21

    Erasing a track from program list to erase a track from the program list, make sure that you are at “view: program” and “prog edit: on” as set up from the “view filter” section. 1 press [ ] to go to the left pane of the menu screen. 2 select the track you wish to erase from the program list. Press [...

  • Page 22

    Listening to am/fm radio the viso two’s internal am/fm tuner offers very high quality sound from radio broadcasts. The reception and sound quality will always be dependent to a degree however on the type of antenna(s) used as well as proximity to the broadcast origin, geography and weather condition...

  • Page 23

    Choosing tuner mode the front-panel [tuner mode] key is a dual-purpose control. In the normal position, “fm stereo” and “fm mute” icons on the vfd are lit; only the stations with a strong signal can be listened to, and the noise between stations is muted. Pressing the [tuner mode] button again (“fm ...

  • Page 24

    Dab operation with the separately sold nad dab adaptor db1 already connected to the viso two, you can now carry out the viso two to receive dab broadcasts. 1 toggle [am/fm/db] button until dab mode. When dab mode is selected, vfd will show “dab initialize – please wait” and then go to “full scan” mo...

  • Page 25

    Dynamic range the level of compression of stations can be set to eliminate the differences in dynamic range or sound level between radio stations. Popular music would normally be more compressed than classical music, resulting in possible different audio levels when changing from one station to the ...

  • Page 26

    About xm radio the viso two is “xm ready” which means that with the addition of separately sold xm mini-tuner cpc-9000 and xm mini-tuner home dock, it has everything you need to listen to live xm. Everything else is built right in. Just subscribe to the xm service and your viso two will be ready to ...

  • Page 27

    Ipod menu options there are two menu options for ipod – menu mode and simple mode. At “menu mode”, ipod navigation will be done and guided through the vfd of the viso two. At “simple mode” everything will be guided through your ipod’s own display screen as you would do in normal ipod use. “menu mode...

  • Page 28

    Specifications • controls up to 8 devices. • 44 function keys. • learns up to 352 commands. • records up to 44 macros with a maximum of 64 commands each. • configurable punch-through. • key illumination with programmable timeout. • upgradable. • contains pre-programmed library of nad remote codes. T...

  • Page 29

    Learning codes from other remotes begin by positioning the htr 6 “nose-to-nose” with the source remote so the two devices’ infrared windows are about 2 inches apart. • enter learning mode: on the htr 6, simultaneously press-and-hold for 3 seconds both a device selector key and the [ ] key until the ...

  • Page 30

    Executing macros to execute a macro, press and release [macro]; its key illumination lights for 5 seconds. While it remains lit, press an htr 6 key to which a macro has previously been stored. The corresponding macro will run; as each step executes, its “parent” device selector’s key flashes lights ...

  • Page 31

    Loading code libraries the htr 6 can store a different library of default nad codes for each of its device selector “pages.” if the original default library does not control your nad cd player, dvd player, or other component, follow the procedure below to change the code-library. Begin by ensuring t...

  • Page 32

    Condition possible causes possible solutions nosoundfromallchannels. Ac power unplugged. • check ac cable connection and outlet. • power not switched on. • outlet has no power. • nosoundfromsomechannels. Faulty/missing cables. • check cables. • speaker connections faulty. • check speaker connections...

  • Page 33

    Amplifier section power output stereo mode 50w ihf dynamic power; 8 Ω 70w ihf dynamic power; 4 Ω 100w total harmonic distortion at rated power 0.08% im distortion at rated power 0.08% damping factor, 8 Ω >60 input sensitivity and impedance 300 mv/47kΩ frequency response ±0.5 db (ref. 20hz to 20khz) ...

  • Page 34

    Www.Nadelectronics.Com ©2008 nad electronics international a division of lenbrook industries limited all rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of nad electronics international viso two owner’s manual issue 1-0...