Nadatel CM-1040S User Manual - page 42
42 |
P a g e
Selected Checkbox: The user can access to the function.
Blank Checkbox: The user can not access to the function.
USER PASSWORD
Options are ADMIN, NETWORK, USER1, USER2 and USER3.
Select USER PASSWORD using the mouse or the control button on the remote control
and press SEL button. Select user type and enter the current password. And, enter a
new password, enter the same password again to confirm and select OK. Then the
message “PASSWORD CHANGED” is displayed.
The factory default password is 1111.
PLAYBACK AUTHORITY
Allows specific users AUTHORITY OF PLAYBACK per CHANNEL
When the user set this function, the login window will appear. Then, the user can select one of user types (ADMIN,
USER1, USER2, USER3) using the mouse or the control button on the remote control. The user can select a password
using the mouse or the control button on the remote control. The factory default password is 1111. It is highly
recommended to assign a new password to protect the system. User can assign a new password in the SECURITY
setup menu.