Nady Systems 8W-1KU Owner's manual - Specifications
17
Specifications
SYSTeM OVeRall SPeCIFICaTIOnS
Operating Frequency Range
(U.S.) Band 1: 672.000-696.975MHz, (Int.) Band 2: 795.000-
819.975MHz
Freq. Synthesized
(1000 channels switchable) 25kHz/ step
Pll System Frequency Stability
<0.005%
Frequency Response
30Hz-18kHz +/-3dB
Dynamic Range
120dB
Harmonic Distortion
<0.5%
Modulation
FM (F3E) +/-25kHz normal, +/-75kHz max
Operating Range
150-250 feet typical, 500+feet max line-of-sight
8W-1KU ReCeIVeR SPeCIFICaTIOnS
Receiver System
Dual conversion Super Heterodyne with True Diversity
(Two complete receiver sections with optimum audio selected)
Selectivity
60dB, normal +/-75kHz offset
Image Rejection
-70dB, minimum
Sensitivity
-107dBm, normal
Spurious Rejection
65dB, normal
Mute Threshold
-65dBm to -95dBm (adjustable)
Controls
UP/DOWN selection, SET, IR Sync, Power ON/OFF buttons,
and MUTE Level control
lCD Display
Backlight LCD panels indicating selected Group/Channel, Received
RF levels, and unbalanced Line out Volume levels
leD Display
A/B diversity
LEDs indicating received signal from transmitter
AF/Peak LED indicating received audio levels from transmitter
audio Output level
Unbalanced output: LINE Level output adjustable
Balanced output: MIC level output fixed
Output Impedance
Balanced: 600
Ω and unbalanced: 1.0k Ω
Power Requirement
Regulated
+12VDC/2500mA
antennas
Dual BNC right angle
Dimensions
17”W x 11.5”D x 3.75”H (43.2cm x 29.2cm x 9.53cm)
Weight
10.75 lbs (4.88 Kg)
Housing Construction
Metal
HT-1KU HanDHelD TRanSMITTeR SPeCIFICaTIOnS
RF Output Power
HI/LOW selectable
HI: +14dBm (25mW typical), LOW: +4dBm (2.5mW typical)
Harmonic and Spurious emission
-50dBc normal
audio Input levels
24mV for +/- 25 KHz deviation
Impedance
6.0 k
Ω
Controls
Power ON/OFF, RF Power HI/LOW switches, Set/Up/Down
lCD Display
Group/Channels/ Input Volume/ Battery Levels
antenna Type
Integral
Battery Type
2 x AA alkaline batteries operation
Battery life
8-10 hours typical
Dimensions
10”L x 2”D (25.4 cm x 5.1 cm)
Weight (w/o batteries)
11 oz (0.312 kg)
Housing Construction
Metal
BT-1KU BODYPaCK TRanSMITTeR SPeCIFICaTIOnS
RF Output Power
Hi/Lo selectable
HI: +14dBm (25mW typical), LOW: +4dBm (2.5mW typical)
Harmonic and Spurious emission
-50dBc normal
audio Input levels
(Lapel/Lavaliere—LT)/ (Headmic™ LT/HM)/ (Instrument—GT)
Input Impedance
5k
Ω (Lav Mic), 500 kΩ (Instr.)
Controls
Power OFF/MUTE/ON, RF Power HI/LOW switches, Set/Up/Down
Input Connector
Mini 3.5mm with locking nut