Nady Systems 8W-1KU Owner's manual - Quick User Controls Guide
6
Quick User Controls Guide
HT-1KU Handheld Transmitter
22. BATTERY COVER Unscrew CW and pull down to
insert two AA alkaline batteries
23. MIC BALL Windscreen/dust cover
24. LCD DISPLAY For indication of GRP (00-09)/ CH
(00-99), AUDIO INPUT LEVEL (0dB to -30dB),
and BATTERY status (5 bars and
“BATT.”)
See 30/31/32/33 in HT-1KU transmitter diagram
above for detail LCD display indicators.
25. UP BUTTON To change the GRP/CH or VOL
level up by one step at a time or to light up the
display
DOWN BUTTON To change the GRP/CH or VOL
level down by one step at a time or to light up
the display
26. SET To scroll through the LCD menu and set
the selected program/function
27. RF POWER SWITCH Select the TX power output
level high or low
28. POWER ON/OFF SWITCH Slide power switch up/
down to turn ON-OFF
29. INTERNAL ANTENNA Built-in antenna
30. FREQUENCY GROUP Indicates selected GROUP
from 00-09
31. FREQUENCY CHANNEL Indicates selected
CHANNEL from 00-99
32. INPUT VOLUME LEVEL Indicates input audio level
ranging from 00dB to -30dB
33. BATTERY METER Indicates battery status (5
bars=100%, 1 bar=20%). Change batteries
when flashing “BATT”)
34. IR RECEPTOR SENSOR/WINDOW Infrared LED
sensor for IR frequency download from RX
35. BATTERY COMPARTMENT
36. TWO AA ALKALINE BATTERIES