Uhf wireless microphone syetem user manual.
Welcome to select uhf wireless microphone system, and welcomes you to join our clients team. Uhf wireless microphone system is a professional design and production, with the perfect professional sound quality, using the world's most advanced multi-channel digital phase-locked loop of the dpll freque...
Wireless receiver function ☞ wireless receiver control panel description ⅰ receiver front panel ● 1 volume indicator: has four green and one red light, the number of the green light is means the voice value. If it was red light, then the voice is high enough and distortion, please turn down the valu...
● 10 antenna socket: ☞ receiver lcd description ● 1 group menu display: displays the current working group. ● 2 channel menu display:indicating that the current operating channel. ● 3 volume menu display:to display volume signals. ● 4 signal menu display: display the current signal strength. ● 5 ant...
Press “set”button ,make transmitter point at receiver’s infrared automatic freqency window,and hold it for 2-3 seconds;receiver’s channel parameters shall be sent to transmitters via infrared data. ⅱ group settings press "set" button to enable lcd in "group" flashing, and then press "▲" or "▼" butto...
ⅰ handheld transmitter positive map ● 1 microphone head:includes microphone grille and microphone capsule. ● 2 tube body: containing batteries 、 transmitter pcb, built-in function keys, built-in transmitting antenna tail. ● 3 lcd screen:display group、channels and battery. ● 4 up and down select keys...
☞ handheld transmitter lcd instruction ● 1 group display:display the current operating group. ● 2 channel display:display the current operating channel. ● 3 battery display:display the current remaining battery capacity. Battery operation instruction ☞ handheld transmitter battery installation 1. Ho...
2. Put two new aa alkaline batteries on the 5th. Make sure that the polarity of the battery install (figure). Warning: do not install the wrong battery polarity, which may damage electronic components within the transmitter. 3. Afresh spin on transmitter lower part case ☞ body pack transmitter batte...
Notes ＊please choose non-intermodulation frequency setting.Within 50 mhz bandwidth,usually 4-8 transmitters can be used at the same time.If more sets of wireless microphones are needed,devices with other frequency band should be applied. ＊there should be appropriate distance between the receiver and...
Trouble clearing problems solutions no indication on receiver link the power supply cable well audio signal distortion, extra noise remove the rf interference sources nearby (such as cd players,computers,digital devices,earphones monitoring system) receiver can not receive rf signal check the recept...
Technical specifications frequency range: 672.000 mhz-696.975 mhz modulation mode: fm total group: 9 total channel: 1000 frequency stability: ±0.005% dynamic range: 100db maximum deviation: ±45khz af response: 80hz-18khz(±3db) overall s/n ratio: >105db overall distortion: ≤0.5% working distance:abou...
