Nady Systems 9E3W1KUH User Manual - page 3
Wireless receiver function
☞
Wireless receiver control panel Description
ⅰ
Receiver Front panel
●
1
Volume indicator: Has four green and one red light,
the number of the
green light is means the voice value. If it was red light, then the voice is
high enough and distortion, please turn down the value.
●
2
LED :Display
group、channel、
volume
、
signal
●
3
Function keys:Press SET button to select the main menu one
by one
in a cycle,press
“▲”“▼”button to change or confirm the current state of
the selected menu,then press the SET button again to make the setting in effect,hold
the “▲”“▼” button for a long time to quickly select the frequency and channel.
●
4
Infrared light: When press“ACT”key,The light is working.
●
5
Infrared frequency button:press
“ACT”button,
Channel parameters will
be transmitted to the transmitter.
●
6
Power on/off Switch:press
“POWER”button,
Open the receiver power.
ⅱ Receiver back panel diagram
●
7
Socket:
12V DC power supply input socket, Socket connection is the
center electrode voltage.
●
8
Audio Balanced Output: The use of "XLR"-type socket,
Two-channel
signal separately output.
●
9
Audio Mixed Output: Two signals will be mixed with the output