1. DL manuals
  2. Nady Systems
  3. Speakers
  4. WA-120
  5. Owner's Manual

Nady Systems WA-120 Owner's Manual

Other manuals for WA-120: User Manual, Manual
Manual is about: Portable Wireless PA

Summary of WA-120

  • Page 1

    Wa-120 portable wireless pa owner’s manual.

  • Page 3: Contents

    Contents introduction ....................................................................................2 controls and connections .......................................................3 operating instructions for the nady wa-120 ....................5 wa-120 wireless microphone receiver operation...

  • Page 4: Introduction

    Thank you for purchasing a nady wa-120 wireless portable p.A.—and congratulations on your choice. The wa-120 is the most affordable and compact of the popular line of nady wireless p.A.’s. Ideal for many applications, including use in classrooms, conference/meeting rooms, churches, health clubs and ...

  • Page 5: Controls and Connections

    3 mic/ts 1. Wireless mic receiver antenna pull out and extend fully for optimum range 2. Power on/off switch 3. Mic and aux signal input jacks ¼” ts (mono) 4. Speaker 5. Power on led indicator 6. Rf on led indicator indicates reception of transmitter signal 7. Volume controls 8. Tone controls 9. Lin...

  • Page 6

    4 11. Storage compartment for ac adapter or optional rb-120 12vdc rechargeable battery 12. Mounting hole for use with optional mst-4b tripod stand 13. Battery-mount for 8 x “d” batteries used for internal battery operation of unit 14. External dc input jack 15. Rf mute threshold (squelch) adjust 16....

  • Page 7: Powering The Wa-120

    5 operating instructions for the nady wa-120 powering the wa-120 • external adapter plug the external provided ac/dc adaptor into the external dc input jack (14) socket. Then plug the ac/dc adapter plug into a standard 115vac or 240vac outlet (the ac adapter will detect the line voltage automaticall...

  • Page 8: Wiring Illustration

    Then mic input (3) can be used to connect a hard wire mic. The rec out (9) can be connected to a recording device or to the input jack of a power amplifier to further amplify and enlarge the audio power. For stereo to mono conversion of the signals, wire the connecting cord as per the the following ...

  • Page 9: Stand Mounting The Wa-120

    7 stand mounting the wa-120 the wa-120 can be mounted on the optional mst-4b aluminum tripod stand for convenient place- ment in a higher position. Contact your dealer or the nady service department. (see page 12).

  • Page 10

    The wa-120 contains a built-in high quality quartz-locked, fixed frequency vhf wireless receiver precisely matched to the nady wht or wlt transmitter supplied; therefore generally no adjustments besides audio volume are required. In high rf activity environment, the mute (16) also needs adjusting to...

  • Page 11

    9 the nady wlt is a rugged compact bodypack designed for use with lavalier or headworn mics, and includes these special features: • off/standby/on switch allows convenient audio muting with the transmitter “on” • low battery led indicator flashes once for unit “on”; lights steady for low battery ale...

  • Page 12: Wlt Bodypack Transmitter

    Off/st andby/on bat low hi mic 10 wlt bodypack transmitter opening battery compartment 5 4 7 6 2 1 8 3.

  • Page 13

    Transmitter set-up and operation • snap open the battery compartment (1) and insert a fresh 9v battery (2), observing the correct polarity. Close the compartment. • the wlt is provided with a 3.5 mm locking jack (3) for connecting themicrophone. Plug in either the lavalier/lapel (4) or the headworn ...

  • Page 14: Specifications

    12 audio power output: 20w maximum, 4 ohms external ac power: 100~240vac/50~60hz (universal line voltage adaptor supplied) ac power consumption: 40 va external dc power: 15vdc, 1200ma ac adapter internal batteries: 8 “d” size alkaline batteries (sum-1) or optional 12v/1.2a (rb-120 rechargeable batte...

  • Page 15: One Year Limited Warranty

    One year limited warranty nady systems, inc. Warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, nady systems, in...

  • Page 16

    Nady wireless systems are type accepted under fcc rules parts 90, 74 and 15. This device complies with rss-210 of industry & science canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference recei...