Wa-120 portable wireless pa owner’s manual.
Contents introduction ....................................................................................2 controls and connections .......................................................3 operating instructions for the nady wa-120 ....................5 wa-120 wireless microphone receiver operation...
Thank you for purchasing a nady wa-120 wireless portable p.A.—and congratulations on your choice. The wa-120 is the most affordable and compact of the popular line of nady wireless p.A.’s. Ideal for many applications, including use in classrooms, conference/meeting rooms, churches, health clubs and ...
3 mic/ts 1. Wireless mic receiver antenna pull out and extend fully for optimum range 2. Power on/off switch 3. Mic and aux signal input jacks ¼” ts (mono) 4. Speaker 5. Power on led indicator 6. Rf on led indicator indicates reception of transmitter signal 7. Volume controls 8. Tone controls 9. Lin...
4 11. Storage compartment for ac adapter or optional rb-120 12vdc rechargeable battery 12. Mounting hole for use with optional mst-4b tripod stand 13. Battery-mount for 8 x “d” batteries used for internal battery operation of unit 14. External dc input jack 15. Rf mute threshold (squelch) adjust 16....
5 operating instructions for the nady wa-120 powering the wa-120 • external adapter plug the external provided ac/dc adaptor into the external dc input jack (14) socket. Then plug the ac/dc adapter plug into a standard 115vac or 240vac outlet (the ac adapter will detect the line voltage automaticall...
Then mic input (3) can be used to connect a hard wire mic. The rec out (9) can be connected to a recording device or to the input jack of a power amplifier to further amplify and enlarge the audio power. For stereo to mono conversion of the signals, wire the connecting cord as per the the following ...
7 stand mounting the wa-120 the wa-120 can be mounted on the optional mst-4b aluminum tripod stand for convenient place- ment in a higher position. Contact your dealer or the nady service department. (see page 12).
The wa-120 contains a built-in high quality quartz-locked, fixed frequency vhf wireless receiver precisely matched to the nady wht or wlt transmitter supplied; therefore generally no adjustments besides audio volume are required. In high rf activity environment, the mute (16) also needs adjusting to...
9 the nady wlt is a rugged compact bodypack designed for use with lavalier or headworn mics, and includes these special features: • off/standby/on switch allows convenient audio muting with the transmitter “on” • low battery led indicator flashes once for unit “on”; lights steady for low battery ale...
Off/st andby/on bat low hi mic 10 wlt bodypack transmitter opening battery compartment 5 4 7 6 2 1 8 3.
Transmitter set-up and operation • snap open the battery compartment (1) and insert a fresh 9v battery (2), observing the correct polarity. Close the compartment. • the wlt is provided with a 3.5 mm locking jack (3) for connecting themicrophone. Plug in either the lavalier/lapel (4) or the headworn ...
12 audio power output: 20w maximum, 4 ohms external ac power: 100~240vac/50~60hz (universal line voltage adaptor supplied) ac power consumption: 40 va external dc power: 15vdc, 1200ma ac adapter internal batteries: 8 “d” size alkaline batteries (sum-1) or optional 12v/1.2a (rb-120 rechargeable batte...
One year limited warranty nady systems, inc. Warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, nady systems, in...
Nady wireless systems are type accepted under fcc rules parts 90, 74 and 15. This device complies with rss-210 of industry & science canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference recei...