NAG SNR-MPX-16E1-SFP User Manual - Snr-Mpx-16E1-Sfp
SNR-MPX-16E1-SFP
16E1 + 1Ethernet Fiber Optical Multiplexer
6/5/2009
Shop.Nag.Ru
Page 3 of 16
CHAPTER 1. GENERAL INTRODUCTION
1.1 Product Description
16E1 + 1Ethernet Fiber Optical Multiplexer can multiplex to 16 E1 signals for
transmission over an optical fiber, resulting in reaching a longer distance without a repeaters
and superior performance compared to copper media.
16E1 + 1Ethernet Fiber Optical Multiplexer is the 16E1 point-to-point optical transport
equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure
and the largest transmission capacity is 16E1. The outer design use the standard 19 inches
rack, so the volume is little, weight is light and operation is convenient and credit.
16E1 + 1 Ethernet Fiber Optical Multiplexer uses the PDH fiber transmission
technologies. The 2Mbps (E1) interfaces can connect with the exchanger, light loop device
and multi-diplexer directly to the special network. Complete alarm function for 16E1 Fiber
Optical Multiplexer, it is stable and easy to maintenance, install and small in size. It has one
digital service telephone.
1.2 Principle Chart and Description
Fig1. PDH principle chart