Nagra ARES-BB Plus Manual - page 22
Issue: January 18 2005
Page 22
14.7.2 48V MIKE POWER.
If Phantom microphones are used the 48V must be turned on. This
selection needs to be confirmed by pressing the right arrow key. On the
main display, the text will appear next to the battery status.
15 LOCKING THE SETTINGS.
By pressing a certain combination of keys when turning on the machine,
the settings can then be locked step-by-step. This to prevent, the user
changing the settings inadvertenly or otherwise. To obtain the
combination code, contact your local NAGRA dealer.
Almost all sub-menus can be locked by pressing the “STOP” button or
unlocked by pressing the “PLAY” button. When the sub-menu has been locked, a closed padlock
appears in front of the selected sub-menu. When the sub-menu has been unlocked, the closed
padlock dissapears. To remove the password, switch off and on again the machine.
16 LOCKING THE KEYPAD.
During record or playback the keyboard can be locked by setting the keypad switch (15) to ON. To
unlock the keyboard, set the same switch back to OFF. When the keypad is locked, the message
“KEYPAD LOCK” appears on the display
17 AUTO POWER OFF
When the machine is left in the “STOP” mode for 10 minutes, it will automatically switch off. During
the last 14 seconds of that period, the beep sounds every second. When any key is pressed, the
power counter will be reset.
To disable the auto power off, from the power off status, press and hold the center key while
pressing the power key.
In the case that the machine is turned on with the auto power disabled, the message “NO AUTO
POWER OFF” appears during a few seconds.
18 MESSAGES
"WRONG USB VERSION"
DSP and USB software versions are incompatible
"CARD FULL"
No more memory available on the card
"OPEN WRITE ERROR"
Defective card or card error
"WRITE ERROR"
Defective card or card error
“WRITE ERROR”
During saving in edit mode
"READ ERROR"
Defective card or card error
“READ ERROR”
During saving in edit mode
"CARD TOO SLOW"
Depending from the selected file format, some cards do not
accept a high recording bit rate
"DIRECTORY FULL"
999 Take / Indexs (files) already recorded
"CARD NEARLY FULL"
60 seconds recording time left on the card
"KEYPAD LOCKED"
The full keypad is locked
"AUTO POWER OFF"
The machine will switch of in the next 15 seconds
"LOW BATTERY"
The battery voltage has dropped too low
"NO AUTO POWER OFF"
Auto power off has been disabled
48V. mike power
Off
On
On
Settings
Beep
Compression
Backlight
MPEG 128/48
48