1. DL manuals
  2. NAIM
  3. Processor
  4. AV2
  5. Installation Manual

NAIM AV2 Installation Manual

Manual is about: DVD Player and Audio Processor

Summary of AV2

  • Page 1

    1 system connections av2 installation guide 1.1 av source and av2 with nap v175 and nap 150 digital coax or opt 4-pin din 4-pin din x 2 centre left front 1.2 nait 5i system with av source, av2 and napv 175 digital coax or optical 5-pin din 5-pin din 2 x phono to 5 pin din from av2 analog socket 3 to...

  • Page 2

    2 switch on and input setup 2.1 av2 switch on once all signal connections are made the av2 can be switched on. Connect the av2, using the supplied mains cable, to an appropriate mains socket and operate the power switch on the rear panel. A single flashing dot will be seen on the display while the a...

  • Page 3

    3 speaker setup 3.1 av2 speaker setup the av2 speaker setup routine both defines the presence and type of speakers to be used in the system and sets their listening distance and volume level parameters. To switch the av2 into speaker setup mode press the handset menu key followed by the mode key, or...

  • Page 4

    4 av2 in use 4.1 input selection and volume control to select an input use the handset 5 or 6 keys, the input key or one of the numeric keypad numbers 0 to 9 , or the front panel input button. To adjust the overall volume use the handset vol 5 or vol 6 keys or the front panel rotary control. Access ...