NAIM CD5 - ISSUE 2 Manual - page 20
19
bal (
&)
Modifies the output channel balance. Some
Naim amplifiers have control of balance
available only from the remote handset. On
these products the balance will automatically
centre as it reaches the mid point. Balance
centring is indicated by a flashing volume
control indicator. To resume adjustment once
the balance has centred, bal key must be
released and re-pressed.
mon
Enables the output of appropriately equipped
tape machines to be heard while recording.
The source to be recorded is chosen by the
input selection buttons in the normal way. A
second operation of the mon key restores
normal operation.
Alternatively operates the
mono
function on
appropriately equipped preamplifiers.
Compact Disc
prev
Selects the previous track or index point.
next
Selects the next track or index point.
stop
Stops cd play.
play
Begins cd play.
<< & >>
Fast reverses and fast forwards the cd.
repeat
repeats the cd or programmed tracks.
pause
Pauses the cd.
Tuner
mode
Switches the tuner sequentially through
manual, scan
and
preset
modes. Modes are
indicated by the scan and preset indicators on
the tuner display.
up & down
These keys both have three possible functions
depending upon the selection of the mode key.
In
manual
mode the up and down keys adjust
the tuning frequency in 0.1MHz steps. In
scan
mode the up and down keys will make the
tuner search for stations. In
preset
mode the
up and down keys will tune to the next
numbered preset.
mono
Toggles between mono and stereo operation.
The tuner display will indicate stereo when
both stereo operation is selected and a stereo
signal is received. The mono button on the
tuner will illuminate when mono is selected.
16.1 Introduction
Narcom 3 is a multi-functional remote control handset
designed to be used with Naim Audio CD players,
integrated amplifiers, preamplifiers and preset tuners.
The handset control configuration is based around three
types of keys: System Component Keys, Global Keys and
Soft Keys.
16.2 system component keys
These keys switch the operation of the
Soft Keys
into
modes appropriate to each system component (CD, tuner,
preamp, record).
cd:
Switches the action
of the Soft Keys to that
appropriate for a CD
player.
tuner:
Switches the
action of the Soft Keys
to that appropriate for
a preset tuner.
preamp
: Switches the
action of the
Soft Keys
to that appropriate for
an integrated or
preamplifier.
record:
Switches the
action of the Soft Keys
to select record inputs
on appropriately
equipped preamplifiers.
16.3 Global Keys
These keys operate specific component functions
regardless of the System Component Key setting.
Preamplifier
vol (
& )
Modifies the preamplifier output volume
and the volume control position.
mute
Reduces the preamplifier output volume to
zero. A second press restores the volume.
Narcom 3 Handset
System
component
keys
Global keys
(Preamplifier)
Global keys
(CD Player)
Global keys
(Tuner)
Soft keys