U p d a t e n o t e s issue 2 flash remote handset.
Introduction these update notes provide detailed operating instructions for the naim audio flash remote handset, software version rcc01-02. If you have received these notes as part of a software update pack you must first read appendix 1 – software update procedure and follow the instructions to upd...
Mode ( setup ). To switch between 2ch and av modes press the navi key ( ) for a short time. To enter setup mode, press and hold the navi key ( ). 2 channel mode 2.
2 channel mode is used to control 2 channel products such as preamps, cd players and tuners. Volume down ( 6 ), mute (mute) and volume up ( 5 ) hotkeys control preamp volume in this mode. Preamp key (pre) selects 1 of 2 preamp pages. Pre-s - numeric keys control preamp source selection. Pre-r - nume...
Av key (av) press and release to selects one of 3 av pages. Press and hold to send av standby command. Av-i/p - numeric keys control av processor input selection. Av-mode - numeric keys control av processor mode selection. Av - numeric keys are disabled. Dvd key (dvd) press and release to selects on...
Adjust the current settings displayed on the right, and press ok ( ok ). Lights the lights setting controls the screen and button backlight. It has 4 settings: off – always off. On – on whenever the handset is awake. Auto – on whenever the handset is awake and the ambient light level is low (default...
Softkeys the softkey setup menu allows alternate commands to be assigned to any of the 8 softkeys on each of the 13 pre- defined product pages. To assign a softkey , select the required product page using the ok ( ok ) key (press exit ( exit ) at any time to return to the instructions page). Then pr...
Appendix 1 - software update procedure introduction this update to the flash remote handset provides the following enhanced features: • dvd and n-sub control functions • menu driven setup facility • user defined softkeys • new screen design with central command indication fully future-proof software...
3. Note the orientation of the pic in the pic socket . There is a chamfer with a dot located on one side of the pic . The replacement pic must be inserted with the same orientation. 4. 5. 6. 7. 8. Attach an anti-static earth strap to your wrist and connect the crocodile clip to the top negative batt...
Appendix 2 – command codes angle-d input-a disp-c (none) vol5-p subt-d spkr-a prog-c 5-a audio-d open-c vol6-p mem-d 1-c 6-a mute-p 1-d 2-c 4-a mon-p 2-d 3-c bal4-p 3-a 3-d 4-c 3bal-p i/p1-a 4-d 5-c i/p2-a disp-p 5-d 6-c i/p3-a prog-p 6-d 7-c i/p5-p i/p4-a 7-d 8-c i/p5-a i/p6-p 8-d 9-c i/p6-a 1-p 9-...
Appendix 3 – product commands use the following images to note changes to softkeys for future reference. Preamp default user cd default user 10
Tuner default user av default user 11.
Dvd default user subwoofer default user 12.
Naim audio limited, southampton road, salisbury, england sp1 2ln telephone: +44 (0) 1722 332266 fax: +44 (0) 1722 412034 www.Naim-audio.Com part no. 12-001-0052 drawing no. Na906002-420/1.