Nakamichi DELTA 20 User Manual - page 10
8
ii) FM mode ONLY
SCAN SETTING: Select STRONG or ALL for scanning reception
iii) Available in All Mode
DATE / TIME SETUP: Set the Date and Time manually or synchronised to the DAB / FM broadcast signal
UPDATE: Select the clock to be automatically synchronised to the broadcasting signal data or not -
DAB / FM / NONE / ANY.
If “NONE” is selected, the clock will not synchronise to any broadcasting signal.
If “ANY” is selected, the clock will be synchronised to both the DAB and FM broadcasting signal.
12 / 24 HR: Set the time display mode (12 hours / 24 hours).
BACKLITE: Set the brightness of the display - TIMEOUT duration and LEVEL setting.
AUDIO SETTINGS: Set FM MONO/STEREO mode
STRONG: Scanned for stations received with strong signals only.
ALL: Scanned for all stations received with strong and weak signals.
SET TIME: Press
on the remote or rotate the VOLUME knob on the front panel to adjust the time and
date, followed by pressing on the remote or pressing on the VOLUME knob to confirm and save.