Nakamichi NA88 Instruction Manual - Basic Operation
When you press or hold the following button(s)...
Main unit
General operation
SRC
■
■
■
■
■
■
■
■
■
■
■
Select the available sources (Radio, AUX IN ,USB ,SD or BT AUDIO ), if the power is turned on.
Rotatory
Volume knob
Rotate it to increase or decrease the volume.
Select items.
Power / Mute
Confirms selection.
Under Media playback mode to view play informations.
BAND
■
Select the FM bands (FM1/ FM2/ FM3) or AM1 (MW1) / AM2 (MW2) .
■
Under media playback to access into search mode.
Pause/resume playback of a USB / SD device.
■
Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode.
■
Under USB /SD Media playback mode to skip track / file, press and hold to fast forward / backward.
MENU
To access into the Audio Menu mode, press and hold to enter into the System Menu mode.
Turn On or Off dynamic bass boost sound.
Turn On or Off the Xbass bosster function.
During the talking, press and hold to transfer the call back to mobile phone.
DBSS
Turn mute or restore volume.
Turn the unit on. Press and hold again to turn the unit off.
1
SUB-W
Press to view the Clock. Press & hold to turn On or Off the Subwoofer function.
Returns to the previous item.
To reject / end the call.
EQ / XBASS
Basic Operation
To adjust the EQ (Preset Equalizer) setting.
To answer / accept the call.
/
MENU
SUB-W
DBSS
XB
A
S
S
BAND
SRC
EQ
1
2
3
4
5
6
Detaches the
control panel
Rotary Volume Knob
Display Window
Power / Mute
USB terminal
Aux-In jack
Push open the cover
■
Press and hold to activate the Auto Store function.
APP HOME
■
■
APP HOME
2-WAY CONTROL
4
Press & hold the "APP HOME" Button to go to the app home interface. Use the volume knob to select
the desired function on the app and press the center of the volume knob to confirm the selection.
■
■
5 EN
Once you find Still Speed Camera, Traffic Light Camera, etc, you can record the CAMERA location by hold
pressing the camera button. If you re-enter same location within 200 meters way at high speed, it will s
ound an alarm until you reduce the speed and it will stop the alarm once the speed is slowed down.
Noted: 1) If click STOP button on the alarm box, the alarm sound & alarm box will vanish and will not
show again, Camera Alert will be off but the Camera Save Location function will be still on.
Noted: 2)
This function will only work when the apps is turned on, GPS Location Service must be turned
on and can receive GPS signal normally.
Tips: You can delete camera data record in setting.