Nakamichi NA88 Instruction Manual - Function Settings
Function Settings
1 Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode.
2 Press repeatedly to select the item to be adjusted.
3 Turn the encoder volume knob to select a value / option.
MENU
[MENU]...
Item Selectable Setting
CLOCK SET
CLOCK FORMAT
BEEP TONE
Adjust the Hours and Minutes
Select the time format 12H or 24H
Turn On or Off this beep sound
MENU
CLOCK
[AUDIO MENU]...
Item Selectable Setting
BASS ADJUST
SUBWOOFER ADJUST
TREBLE ADJUST
BASS LEVEL
SUBWOOFER LEVEL
TREBLE LEVEL
SUBWOOFER LPF
BALANCE
FADER
Adjust the level -7 to +7.
Adjust the level 0 to 12.
Adjust the level -7 to +7.
Subwoofer low pass filter range: 80 / 120 / 160.
Adjust the balance between the right and left speakers from 12R (full right) to 12L (full left).
Adjust the fader between the front and rear speakers from 12R (full rear) to 12F (full front).
Adjust the level -7 to +7.
MIDDLE LEVEL
MIDDLE ADJUST
GPS VOICE MIX
SUBWOOFER
Turn On or off this Subwoofer function.
GPS VOICE MIX
GPS VOICE MIX
LEVEL
Adjust the level 0 to +12.
Turn On or Off this
( If it is on, When listening radio or USB/SD audio, user can start up, Google Navi at the same time.
The Google Navi voice will mix together with radio music without stopping the radio music.)
GPS Voice Mix
function.
Check the BT connected status.
BT MODE
BT MODE
BT DISCONNECTED
Check the BT Disconnected status.
6 EN
Note: This
function will work
when the app is turned on.
GPS VOICE MIX
only