Nakamichi NK12 Manual - page 23
9
Connect Power
Risk of product damage!
- Ensure that the power supply voltage corresponds to the voltage printed on the
back or the underside of the unit.
- Before connecting the AC power cord, ensure you have completed all other
connections.
t
$POOFDUUIFNBJOTQMVHPGUIFNBJOVOJUUPBNBJOTTPDLFU
t
$POOFDUUIFNBJOTQMVHPGTVCXPPGFSUPUIFXJSFMFTTTVCXPPGFSBOEUPBNBJOTTPDLFU
Pairing the Wireless Subwoofer with the Main Unit
1. Automatic Pairing
Plug the main unit and the subwoofer into the mains sockets and then press STANDBY button on the unit or on the remote control to switch the
unit to ON mode. Then the subwoofer and main unit will automatically pair within 30 seconds.
t
8IFOUIFTVCXPPGFSJTQBJSJOHXJUIUIFNBJOVOJUUIF1BJS*OEJDBUPSXJMMnBTISBQJEMZ
t
8IFOUIFTVCXPPGFSJTQBJSFEXJUIUIFNBJOVOJUUIF1BJS*OEJDBUPSXJMMMJHIUVQ
t
%VSJOH4UBOECZNPEFUIFTVCXPPGFS1BJSJOEJDBUPSXJMMPõBOEnBTITMPXMZ1SFTT45"/%#:CVUUPOUPTXJUDIUIFVOJU0/
Note: Do not press Pair on the rear of the subwoofer, except for manual pairing.
2. Manual Pairing
Note: It is very abnormal that the connection would fail, you should not attempt manual pairing in normal usage.
If the automatic pairing fails and the word “CHECK SUBWOOFER“ showed on the display, ensure that all the cables are well connected, the main
VOJUJTTXJUDIFEUP0/NPEFBOEUIF1BJSJOEJDBUPSJTnBTIJOH*GJUTUJMMEPFTOUXPSLQBJSUIFTVCXPPGFSXJUIUIFNBJOVOJUNBOVBMMZ
1. Unplug both units from the mains sockets again, then plug them in again after 3 minutes.
2. Press and hold the Pair button on the rear of the subwoofer for a few seconds, and then press STANDBY button on the main unit or on the
remote control to switch the unit ON. The Pair indicator on the subwoofer will rapidly blink when pairing and will become solid when
successful.
Note:
t
"GUFSDPOOFDUJOHUIFQPXFSZPVNVTUQSFTT1"*3POUIFTVCXPPGFSXJUIJOTFDPOETUPCFFõFDUJWF
t
5IFTVCXPPGFSTIPVMECFXJUIJONPGUIFNBJOVOJUJOBOPQFOBSFB UIFDMPTFSUIFCFUUFS
t
3FNPWFBOZPCKFDUTCFUXFFOUIFTVCXPPGFSBOEUIFNBJOVOJU
t
*GUIFXJSFMFTTDPOOFDUJPOGBJMTBHBJODIFDLJGUIFSFJTDPOnJDUPSTUSPOHJOUFSGFSFODF FHJOUFSGFSFODFGSPNBOFMFDUSPOJDEFWJDFBSPVOEUIF
MPDBUJPO3FNPWFUIFTFDPOnJDUTPSTUSPOHJOUFSGFSFODFTBOESFQFBUUIFBCPWFQSPDFEVSFT
Basic Operation
Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
t
1SFTTUIF
/
button on the main unit or the button on the remote control to switch the main unit on.
t
1SFTTBOEIPMEUIF
/
button on the main unit or press the button on the remote control to switch the main unit back to Standby
mode.
t
%JTDPOOFDUUIFNBJOTQMVHGSPNUIFNBJOTTPDLFUJGZPVXBOUUPTXJUDIUIFVOJUPGGDPNQMFUFMZ
-
When the unit volume is close to mute or is idle for approximately 15 minutes, it will automatically switch to Standby mode.
OPTICAL