NANO Q User Manual - page 7
OPERATION
PLAYBACK ON TV
When the camera is connected to a TV with an HDMI cable, the
camera screen will be turn off and transfer the display to the TV.
The operation will be the same as when using playback on the
camera.
You can connect a TV for playback via AV-out also, you need to
use a AV-out cable (optional accessory). Plug it into the AV-out
port on the camera body.
SETTING UP THE CAMERA
If you are not satisfied with the default setting, you can
customize your own.
With the camera is in standby, hold the UP button to enter the
setting menu.
Use UP and DOWN buttons to choose the setting subjects you
want to configure, press OK to select; then press UP and DOWN
buttons to choose the option you want, press OK to confirm and
exit. Hold UP button at any time to cancel.
Please review the SETTING section to learn about setting
subjects.
PLAYBACK ON COMPUTER
When you wish to review the videos or photos on computer, a
microSD card reader can be used. GPS PLAYER link is placed in
the PLAYER folder when a microSD card is formatted by the
camera, the player can playback the recorded video with GPS
traces. You can also use a compatible media player to playback
the MOV video files directly, without the GPS trace.
If you don’t have a microSD card reader on hand, you can
connect the camera to your computer with the supplied USB
cable. The camera will be recognized as a mass storage device
instead of a microSD card reader.
RECORDING MUTE VIDEO
When the camera is in either standby or recording, you can
press the UP button to mute the microphone inside camera any
time. Press the UP button again to cancel mute status.
SOS MANUAL PROTECT VIDEO
The camera support automatic loop recording which means the
oldest video will be over-written by new video when the card is
almost full unless the video is protected (Read-only file
attribute).
The camera can auto protect videos if the G-sensor data
exceeds the configured threshold.
You can also manually protect the video by pressing the DOWN
button. Hold the DOWN button to cancel protected status.
CONNECT CAR DVD/NAVIGATION
When need to live view or playback on car DVD/navigation
system, you need to use a AV-out cable (optional accessory).
This plug into the microUSB port on camera body.