NanoCam Plus NCP-DVRHD2 User Manual - page 15
15
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.8.4 Language
The
Language setting is used to select your preferred Language in the menus. To set the systems language follow the
instructions below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2. Hold the
M
Button for 2 seconds to enter the
Settings Menu.
3. Use the
<
and
>
Buttons to navigate the Settings Menu and highlight the Language setting and press
OK
to select.
4.
Use the
<
and
<
Buttons to highlight your required language, then press the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.8.5 Date Stamp
Date
stamp
will stamp the current date onto the footage for future reference. To set the date stamp please follow the
instructions below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2. Hold the
M
Button for 2 seconds to enter the
Settings Menu.
3. Use the
<
and
>
Buttons to navigate the Settings Menu and highlight the Date Stamp setting and press
OK
to
select.
4.
Use the
OK
button turn off and on
Date Stamp indicated by the check box
.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
3. For instructions on how to set your DVR's internal clock, please see the section named Date (2.8.3).
2.8.6 Delayed Shutdown
The Delayed Shutdown setting is used to set the amount of time the DVR will record after your vehicle is parked. To set the
shutdown delay follow the instructions below.
1.
Press the
OK
Button to stop the Car DVR from recording.
2. Hold the
M
Button for 2 seconds to enter the
Settings Menu.
3. Use the
<
and
>
Buttons to navigate the Settings Menu and highlight the Delayed Shutdown setting and press
OK
to select.
4.
Use the
<
and
<
Buttons to highlight your required delay, then press the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.