Nanoxia Deep Silence 3 User Manual - page 7
EN
3.2 Conversion and removal of the HDD-cage
In order to enable the installation of extra-long VGA cards, the middle HDD cage of the Deep
Silence 3 is modular. If you want to remove the hard drive cage to install a very long graphics
card, please remove both side panels first.
In order to remove the cage, you have to simultaneously pull the lever at the back facing up
and press the tab on the front down.; pull the cage gently outwards.
If necessary, you can attach the modular cage on the holder provided on the case bottom.
Please slide the hard drive cage into it until it is secured by the lever.
4. Fan assembly
Three 120 mm fans are pre-installed in your Deep Silence 3. You can mount up to six fans in
total.
We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately.
These are technically and visually equivalent to the factory-installed case fans and will work in
perfect harmony with the built-in fan control of your case.
You can, of course, connect the additional fans to the fan controller.
Front and bottom of the Deep Silence 3 are equipped with easy to clean dust filters.
We recommend that you clean them on a regular basis.
06