2 s afety instructions english s afety instructions this product has been manufactured to satisfy the international safety standards. Please read all of safety and operating instructions before operating the product and keep this manual for future reference. Mains supply ac 90-250v~, 50/60hz operate...
C ontents 3 english c ontents safety instructions ................................ 2 chapter 1 before you begin ................................... 4 general features ................................. 4 accessories .......................................... 4 chapter 2 controls and functions ..........
C hapter 1 >> before you begin 4 english b efore you begin general features • accurate, brilliant friendly osd with full function • mpeg-2 (mp@ml), mpeg-2 (mp@hl), mpeg4 avc/h.264, hp@l4 • lnb controlling logic (0/22khz tone) • scpc/mcpc receivable from c /ku-band satellites • digital tuner with loo...
C hapter 2 >> controls and functions 5 english c ontrols and functions front panel 1 power ( ) button turns your receiver on/off. 2 arrow (◄/►) buttons adjusts the volume and moves the cursor left/right on the menu 3 arrow (▲/▼) buttons changes channels or moves the cursor up/down on the menu. 4 men...
C hapter 2 >> controls and functions 6 english remote control unit 1 power ( ) button for tv & stb turns your receiver & tv on/off. 2 numeric (0~9) buttons controls the number entry and changes program channel directly. 3 mode ( ) button switches between tv and radio channel list. 4 sleep ( ) button...
C hapter 3 >> connections 7 english c onnections location of your receiver • install your receiver in horizontal position • do not put any heavy stuff such as a tv on your receiver • do not install your receiver in the places as follows: vibrating place, direct sunrays, humid place, too high or low ...
C hapter 3 >> connections 8 english connecting your analog receiver to facilitate the user using analog receiver to view analog channels, this product has been provided with a loop through terminal marked as “loop”. Connect the coaxial cable from this terminal to the if input terminal of your analog...
C hapter 4 >> initial settings and operations 9 english i nitial settings and operations menu information a menu is a field of text shown on the tv screen. Selectable lines are generally activated (highlighted). No-activated lines cannot be selected. Most of menus show short information at the botto...
C hapter 4 >> initial settings and operations 10 english • red (mosaic): save • ok: save and changes to exit for av mode. • menu: save the changes to exit for av mode. • select one or more satellites according to the direction of your satellite dish. You can select many satellites depending on the d...
C hapter 4 >> initial settings and operations 11 english • if there are multiple channels, use the page (+/-) or the arrow (◄/►) buttons to move to channels by page. • press the mode ( ) button to switch between the tv and radio channel. • method 4: in case of more than two scanned satellites 1 pres...
C hapter 4 >> initial settings and operations 12 english selecting the osd teletext, vbi teletext, subtitle and dvb subtitle you can choose the osd teletext, vbi teletext, subtitle and dvb subtitle for the current live tv program if provided from the broadcasting station. • osd teletext: press the t...
C hapter 4 >> initial settings and operations 13 english to view channel list in specific order (alphabet/satellite/provider/hd) 1 press the colored (red/ green/yellow/blue) button. Channel list is highlighted. 2 select alphabet, satellite, provider, or hd using the arrow (▲/▼) buttons. The channel ...
C hapter 5 >> main menu 14 english m enu map installation satellite antenna setting terrestrial motor setting defaults setting auto scanning manual scanning auto scanning manual scanning system setup language setting osd language / audio 1st language / audio 2nd language /epg 1st language / epg 2nd ...
C hapter 5 >> main menu 15 english m ain menu the menu has been carefully designed from user-friendly point of view to assure easy operation to your receiver. The main menu is classified into 7 sub menus that will carry out the various operations individually. Installation in the installation menu, ...
C hapter 5 >> main menu 16 english diseqc (digital satellite equipment control) system mode you can select diseqc using the arrow (◄/►) buttons. You can select one mode among diseqc port1~4 for 1.0 and tone burst 1~2 and off. Tone 22khz in case you are using a dual lnb or two antennas connected to a...
C hapter 5 >> main menu 17 english 3 press the red (mosaic) button to save selected satellites and then press the back ( ) button. 4 if you press the yellow (audio) button, on-screen navigation menu is highlighted. Use the arrow buttons to move the motor to the west, east, north, and south in order....
C hapter 5 >> main menu 18 english 3 press the red (mosaic) button to save selected satellites and then press the back ( ) button. 4 if you press the yellow (audio) button, on-screen navigation menu is highlighted. Use the arrow buttons to move the motor to the west, east, north, and south in order....
C hapter 5 >> main menu 19 english - go to ref. Position: changed position of the motor also applies to the directions for other satellites. - calculate positions: confirm the enable limits/ disable limits function pressing the ok button. This function may not be supported depending on the model. 9 ...
C hapter 5 >> main menu 20 english 2 set the following options to complete manual scanning. Satellite: select a satellite by using the arrow (▲/▼ ◄/►) buttons or page (+/-) buttons. Transponder: set the transponder for the selected satellite. Select a transponder using the arrow (◄/►) buttons. If yo...
C hapter 5 >> main menu 21 english 4 press the red (mosaic) button on the manual scan menu • satellite: select the satellite by using arrow (▲/▼ ◄/►) buttons or page (+/-) buttons • transponder: change the tp with the arrow (◄/►) buttons • frequency: displays the current frequency • symbol rate: dis...
C hapter 5 >> main menu 22 english system setup you can set the system configuration in this menu. Press the menu ( ) button. Select system setup using the arrow (◄/►) buttons on the menu. System setup >> language setting language setting you can set languages for osd, audio 1-2, teletext, subtitle,...
C hapter 5 >> main menu 23 english • video aspect ratio: you can select the display format according to tv screen ratio. ( letter box, pan & scan, mixed, or full) • video signal type: rgb, y/pb/pr, composite • video freeze: on/off • dolby digital: pcm/bitstream • time shift: manual / auto system set...
C hapter 5 >> main menu 24 english channel setup >> delete channels delete channels you can delete tv and radio channels you want. 1 select delete channel using the arrow (▲/▼) buttons on the channel setup menu and press the ok button. 2 select the channel you want to delete using the arrow (▲/▼) bu...
C hapter 5 >> main menu 25 english channel setup >>edit channels edit channels you can rename the channel list. Select edit channels using the arrow (▲/▼) buttons on the channel setup menu and press the ok button. • fav (♥) button: shows favorite channel lists • arrow (◄/►) buttons: switches between...
C hapter 5 >> main menu 26 english parental lock you can lock the channels to prohibit unauthorized users from watching specific channels. Press the menu ( ) button. Select parental lock using the arrow (◄/►) buttons on the main munu parental lock >> channel lock channel lock whenever you want to se...
C hapter 5 >> main menu 27 english 1 select change pin code using the arrow (▲/▼) buttons on the parental lock, system lock, menu lock and press the ok button. 2 enter the old pin code. 3 enter the new pin code. 4 enter the new pin code again to confirm. Note • please keep in mind that the pin code ...
C hapter 5 >> main menu 28 english 3 deleting files select the files with channel up/down buttons and press green key (sleep). 4 format press yellow key (audio) to delete all the files in the storage device. • pvr function in order to use pvr function, the storage device must be connected through sa...
C hapter 5 >> main menu 29 english 2) ftp explorer press o.K. To connect the ftp server select file and press red key (mosaic) for s/w update. Conditional access you can enjoy not only scrambled services using the conditional access modules (cam), but also free-to air services, types of common inter...
T roubleshooting 30 english problem solution no display led on the front panel. No power supply plug the power cord correctly. No picture. Ensure that the stb is switched on. Check the connection status. Check channels and video output status. Poor picture quality. Check the signal level if this is ...
S pecifications 31 english s pecifications tuner & channe satellite(dvb-s2) input frequency 950-2150mhz input connector f-type, iec 169-24, female symbol rate dvb-s2:10-30ms/s(qpsk),10-31ms/s(8psk) 2-45ms/s demodulation qpsk, 8psk convolution code rate dvb-s2: auto1/2,2/3,3/4,3/5,4/5,5/6,8/9,9/10(8p...
C orrect disposal of this product (waste electrical & electronic equipment) (applicable in the european union and other european countries with separate collection systems) this marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at th...