NAPCO GEMINI-P400 User Manual - page 5
5
AR
ME
D
ST A
T U
S
H
1 2 3 4
Keypad Controls and Indicators
Trouble Light
H
will light and the Keypad
sounder will pulse to indicate that a system trouble
is present. (See System troubles, Page 11)
Status Light
will light when all zones are
secure and system is ready to be Armed.
Armed Light
will light when system is Armed,
and will flash when system is in Alarm
Press
A
followed by the corresponding
Function number to
enable special functions
and options. (See Special Functions, Page 10)
To Bypass a zone
, press
B
and the zone
number to be bypassed, and then Arm system.
Press
C
to reset Fire Zone, clear miss-
entered codes, reset Alarm Memory, etc.
Nu me ri c a l
Keys 1-9, 0.
Used to
enter User
Codes, Zone
n u m b e r s ,
etc.
Emergency
Keys Press simultaneously
to signal an emergency condition.
Press:
8
+
G
for Auxiliary Emergency or
9
+
G
for Police Emergency.
(Programmable)
Zone Lights (
1 through 4)
will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
Press
E
to bypass all
i n t e r i o r
p r o t e c t i v e
devices such
as motion
sensors, etc.
Press
D
after entering
User Code
when Arming
or Disarming
System.
Press
F
to remove
entry delay
from the Exit/
Entry door.