1. DL manuals
  2. Napoleon
  3. Indoor Fireplace
  4. GVF36N
  5. Installation And Operation Instructions Manual

Napoleon GVF36N Installation And Operation Instructions Manual

Summary of GVF36N

  • Page 1

    1 w415-0297 / d / 04.03.03 certified under american national standards, ansi z21.11.2, volume ii for unvented room heaters. Unvented millivolt system installation and operation instructions for unvented gas fireplace natural gas model gvf36n propane gas model gvf36p certified for united states using...

  • Page 2

    2 w415-0297 / d / 04.03.03 warning •• under no circumstances should this heater be modified. • provide adequate ventilation and combustion air. Provide adequate accessibility clearance f servicing and operating the heater. Never obstruct the front opening of the heater. • if heater shuts off, do not...

  • Page 3

    3 w415-0297 / d / 04.03.03 napoleon gas fireplaces are manufactured under the strict standard of the world recognized iso 9001 : 2000 quality assurance certificate. Napoleon products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their wor...

  • Page 4

    4 w415-0297 / d / 04.03.03 this gas fireplace should be installed and serviced by a qualified installer to conform with local codes. Installation practices vary from region to re- gion and it is important to know the specifics that apply to your area, for example: in massachusetts state: • the firep...

  • Page 5

    5 w415-0297 / d / 04.03.03 room 2 room 1 this heater shall not be installed in a confined space or unusually tight construction unless provisions are pro- vided for adequate combustion and ventilation air. In order to avoid the possibility of exposed insulation or vapour barrier coming in contact wi...

  • Page 6

    6 w415-0297 / d / 04.03.03 1. Move the fireplace into position and secure using the nailing tabs and/or secure to the floor through the ¼"ø holes located at either end of the base. 2. Install rigid black pipe, 1/2" type-l copper tubing or, if local codes permit, a 3/8" flex connector and shutoff val...

  • Page 7

    7 w415-0297 / d / 04.03.03 nailing tab to install the fireplace face flush with the finished wall, position the framework to accommodate the thick- ness of the finished wall. Bend out the four nailing tabs, attached on either side of the fireplace and secure to the 2x4 framing. The tabs will facilit...

  • Page 8

    8 w415-0297 / d / 04.03.03 the curtain mesh must be kept fully closed during opera- tion to help prevent accidental burns from occurring. The heater must not be used when the hood is removed. Hook the hood over the lip of the curtain sup- port plate. Hood curtain mesh figure 11 remove the backing of...

  • Page 9

    9 w415-0297 / d / 04.03.03 phazer tm logs and glowing embers exclusive to napoleon fireplaces, provide a unique and realistic glowing effect that is different in every installation. Take the time to care- fully position the glowing embers for a maximum glowing effect. Log colours may vary. During th...

  • Page 10

    10 w415-0297 / d / 04.03.03 upper louvres: in- sert the upper louvres into the slots on both brackets. Press the top flange of the hood into the four clips located along the top of the unit as shown. Lower louvres: at- tach each hinge to the fire- box with 2 screws. Hinge screen: position the hinge ...

  • Page 11

    11 w415-0297 / d / 04.03.03 note : ornamental insets can not be used in conjunction with the catalytic door this unique patented catalytic system was designed to provide unparalleled safety and peace of mind. The top of the door contains four catalytic tiles which are designed to filter out combusti...

  • Page 12

    12 w415-0297 / d / 04.03.03 attach the connectors from the black and red wires to the blower. Attach and secure the variable speed switch using the nut pro- vided. Plug the harness cord into the receptacle. The wire harness provided in this kit is a univer- sal harness. When installed, ensure that a...

  • Page 13

    13 w415-0297 / d / 04.03.03 figure 27 this optional kit is meant to be used only in conjunction with the gd65 fan kit, which may be ordered from your wolf steel /napoleon dealer. With the thermostatic sensor option, the fan, when turned on, becomes thermally activated, and will automatically run app...

  • Page 14

    14 w415-0297 / d / 04.03.03 p i n o l o t ff o when lighting and re-lighting, the gas knob cannot be turned from pilot to off unless the knob is depressed. 1. Stop! Read the above safety information on this la- bel. 2. Set the thermostat to lowest setting. 3. Turn off all electric power to the firep...

  • Page 15

    15 w415-0297 / d / 04.03.03 this procedure must be performed by a qualified service person! Inspect the pilot for any visible contamination or debris (usually lint, pet hair, spider webs, carpet fibre, etc.) and remove. Disconnect the pilot from the pilot tubing line. Using a 7 / 16 ” wrench, remove...

  • Page 16

    16 w415-0297 / d / 04.03.03 contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally all parts can be ordered through your napoleon dealer or distribu- tor. When ordering replacement parts always give the follow- ing information: 1. M odel & s er...

  • Page 17

    17 w415-0297 / d / 04.03.03.

  • Page 18

    18 w415-0297 / d / 04.03.03 main burner goes out; pilot stays on. Pilot flame is not large enough or not engulfing the thermopile - service or replace oxygen depletion sensor system - correct piping and/or regulator to provide correct pressure thermopile shorting - clean thermopile connection to the...

  • Page 19

    19 w415-0297 / d / 04.03.03 pilot goes out while standing; main burner is in 'off' position. Gas piping is undersized. - turn on all gas appliances and see if pilot flame flutters, dimin- ishes or extinguishes, especially when main burner ignites. Monitor appliance supply working pressure. - check i...

  • Page 20

    20 w415-0297 / d / 04.03.03 w olf steel fir e p lace ser vice histor y this fireplace must be serviced annually depending on usage. Date service t echnician name service performed special concerns dealer name.