NAPOLI ELECTRONICS NPL-DVD TV 7929 BT Instruction Manual - page 8
07
32
Turn on/off Host
When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts,
hold [ ] button for 3 seconds , the host will turn off.
Access main interface
Turned on, the interface to return the icon to switch to the main interface. As shown below:
When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/image files in the USB device/SD card.
Insert/Eject USB storage device
1. Connect a U disc recorded with media information to the unit by a USB connecting cable.
2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.
Insert/eject SD card
1.
Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.
2.
Enter/exit
Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD
card, touch [
USB
] icon in the multimedia interface to enter into the external storage playback interface; Touch[
SD
]icon to enter
into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch
menu to perform various playback controls.
U Disc/SD Card function operation
When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.
Play
After SD card/USB removable device being read out, the operation methods are similar to disk operation methods.
Touch the function icons so as to access the corresponding function operations.
Touch the [ ] icon or use the touch pen / finger gently sliding around the screen to switch to the main menu page.
Configuração de vídeo
Clique o ícone no interface de configuração para acessar a interface de configuração de vídeo,
como mostrado no diagrama à direita (pic 2): no interface de configuração de vídeo, pode-se ajustar
brilho, contraste, saturação e tom do vídeo.
Configuração de áudio
Clique no ícone no interface de configuração para acessar a interface de configuração de áudio,
como mostrado no diagrama à direita (pic 3): você pode ligar ou desligar as funções existentes na
interface de configuração de áudio e ajuste o volume de ré.
Configuração de idioma
Durante o uso, você pode selecionar seu idioma familiar para mostrar menu pela configuração do
idioma. Clique no ícone no interface de configuração para acessar o interface de configuração,
como mostrado no diagrama a direita (pic1)
Clique o ícone correspondente da barra de linguagem desejada para ajustar para o tipo de idioma,
quando há mais de 3 idiomas, o ícone direcional aparecerá, clique para selecionar idioma de sua
preferência.
PIC 3
Configuração de rádio
clique no ícone na interface de configuração, coloque senha [123456] para entrar como mostrado
no diagrama à direita. Toque o ícone na interface do rádio, o ícone aparecerá, clique para
escolher a região de rádio
PIC 4