Napoli NPL-TV 7874 DIGITAL Instruction Manual - page 14
14
03
Main Menu
27
05
CD/MP3/SD/USB
3.Time Adjust
After selecting TIME, the sub menu will be
shown as the figure below:
In this menu you can adjust the CLOCK and TYPE.
Click the hour(minute,second) firstly and then
click / to adjust the proper numerical value.
Click SAVE to save preferences, click RESET to
go back to the default setting.
Click to go back to the SOURCE menu, click
to go back to the previous menu.
4.SCREEN AD
After selecting SCREEN ADJ, the sub menu
will be shown as the figure below:
In this menu you can adjust the monitor by
clicking icon shown on the screen until the
icon shown at the middle of the screen, then click
to save.
J
5.SYSTEM
After selecting SYSTEM, the sub menu will be
shown as the figure below:
In this menu you can set the KEY BEEP, BRAKE
DETECT, REVERSE POLA and GPS VOICE
PROMPT.
Click the / to choose your desired pattern.
Click / to turn another page as the figure
below:
In this menu you can set the AMS FULLUP,
LOCAL AREA, PANEL LIGHT, REVERSE
DETECT.
KEY BEEP:
The key beeps when set ON, silent
when set OFF.
BRAKE DETECT:
Brake is detected automatically
when set ON, automatic detection closes when set
OFF.
REVERSE POLA: Reversed signal is sent to the
unit +12V when set BATTERY, 0V when set
GROUND.
GPS VOICE PROMPT: GPS voice prompt
is heard only during navigate mode when
set OFF, heard during any mode when set ON.
*
If GPS voice reported incomplete, please adjust the volume of
the map.
Note:
Selecting Track
2
* This function is operated by using the remote
control.
Note:
* Press CLEAR to clear the mistake input.
22
During CD playback, first press GOTO,
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons.
Second press GOTO button, track go to:--:--
appears on TFT, also input your desired
numbers to play the current time of your
selection.
During MP3/SD/USB mode, first press
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track s Number to play it; secondly press
GOTO button, and the TFT shows : --:--,
now input the desired time to play the
current track at this point.
2
Stop Play
During CD/MP3/SD/USB playback, press
to stop the playback.
18
Playing Tracks at Random
During CD/MP3/SD/USB playback,
RDM button on the remote control to
play
random under the directory
which you select. P
return to
press
any track at
ress it again to
normal playing.
16
* This function is operated by using the remote
control.
Note:
Pause the Playback
During CD/MP3/SD/USB playback, press
to switch between play and pause.
Note:
* Clicking on the screen performs the same
function.
Press ( or ) on remote control to
perform fast rewind or fast forward.
Skip backward/forward/F.F
/F.REW the playback
20
Note:
* This function is operated by using the remote
control.
Note:
* Clicking on the screen performs the
same function.