Nation Flooring Equipment 3474-L-SUN Instruction Manual - Machine Maintenance
Machine Maintenance
www.nationalequipment.com
Phone: 763-315-5300
13
GENERAL MAINTENANCE
When cleaning and servicing the machine, you must switch off the machine and remove the plug from the socket.
•
Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the opening on the machine, especially the opening for cooling
air.
•
Before moving the machine from the work area, the machine must be cleaned. Furthermore, the inlet must be locked using the expanding
plug attached.
•
All other equipment must be regarded as contaminated and be treated thereafter.
•
If possible, use a special suitable room.
•
Proper personal protective equipment must be used.
•
All parts which are contaminated after service must be properly disposed of in plastic bags according to all regulations.
•
If the machine has to be used for other purposes, it is extremely important that the machine is cleaned, to avoid the spread of hazardous
dust.
SERVICE
1. Remove the plug from the wall socket when carrying out maintenance work. Risk of personal injury. Replace all guards over the motor and
fan components once servicing is complete.
2. Always keep an eye on the machine when using the Auto Start function. Risk of personal injury.
3. Dust can be spread when cleaning the coarse fi lter and during fi lter and bag replacement. Accordingly, the user should wear protective
glasses, protective gloves, and a breathing mask conforming to protection class FFP3.
4. Do not puncture the absolute fi lter. Risk of dust dispersion.