1. DL manuals
  2. National Instruments
  3. Storage
  4. HDD-8263
  5. Installation Manual

National Instruments HDD-8263 Installation Manual

Summary of HDD-8263

  • Page 1

    Installation guide hdd-8263/8264 this guide describes the hdd-8263 and hdd-8264 products, lists what you need to get started, and explains how to set up and get started with your hardware. Contents safety information .................................................................................. ...

  • Page 2: Safety Information

    Hdd-8263/8264 installation guide 2 ni.Com safety................................................................................................15 electromagnetic compatibility.........................................................15 ce compliance......................................................

  • Page 3

    © national instruments corporation 3 hdd-8263/8264 installation guide you must insulate signal connections for the maximum voltage for which the module is rated. Do not exceed the maximum ratings for the module. Do not install wiring while the module is live with electrical signals. Do not remove or...

  • Page 4: Sicherheitshinweise

    Hdd-8263/8264 installation guide 4 ni.Com rack mount safety information caution due to the device weight, two people should work together to mount the device in a rack. Caution install the unit as low as possible in the rack to maintain a lower center of gravity and prevent the rack from tipping whe...

  • Page 5

    © national instruments corporation 5 hdd-8263/8264 installation guide soweit nicht anders beschrieben, dürfen keine veränderungen am gerät vorgenommen werden. Das gerät darf nur zusammen mit den in der instal- lationsanleitung aufgeführten chassis, modulen, kabeln und zubehör- teilen genutzt werden....

  • Page 6

    Hdd-8263/8264 installation guide 6 ni.Com das gerät darf maximal in der messkategorie 1 betrieben werden, die auf dem etikett verzeichnet ist. Jeder messkreis hat eine bestimmte arbeits- spannung 2 . Daneben können jedoch durch den stromkreis, an den das messgerät angeschlossen ist, vorübergehende s...

  • Page 7: Introduction

    © national instruments corporation 7 hdd-8263/8264 installation guide beim einbau in einen gestellrahmen sind folgende sicherheitsrichtlinien zu befolgen: • betriebstemperatur—in einem geschlossenen gestell oder einem gestell für mehrere geräte kann die betriebstemperatur höher als die umgebungstemp...

  • Page 8: About The Hdd-826X Series

    Hdd-8263/8264 installation guide 8 ni.Com about the hdd-826x series description and features the hdd-8263 is a 1u chassis specifically designed for raid applications by national instruments. This chassis supports up to four enterprise class sata hard drives controlled by a four-port pci express hard...

  • Page 9: Unpacking

    © national instruments corporation 9 hdd-8263/8264 installation guide ❑ cable: pci express x4 ❑ software: raid drivers (on the included cd) note you cannot use the ni pxie-8103 controller with hdd-826x. Unpacking your hdd-826x system is preassembled and preconfigured for use. You need only to remove...

  • Page 10: Installing An Ni 8262

    Hdd-8263/8264 installation guide 10 ni.Com installing an ni 8262 complete the following steps to install the ni 8262 in your pxi express or compactpci express chassis: 1. Power off your pxi express or compactpci express chassis, but leave it plugged in while installing the ni 8262. The power cord gr...

  • Page 11: Cabling

    © national instruments corporation 11 hdd-8263/8264 installation guide cabling connect the cabled pci express x4 cable to both ni 8262 and the hdd-826x chassis. The cables have no polarity, so you can connect either end to either the card or chassis. Caution do not remove the cable after the system ...

  • Page 12: Hot Swapping Hard Drives

    Hdd-8263/8264 installation guide 12 ni.Com caution reconfiguring your raid arrays erases all data on your system. Back up all data before reconfiguring. • shortly after powering on your host system, follow the onscreen directions for entering the option rom configuration menu. • install the raid man...

  • Page 13: Led Indicators

    © national instruments corporation 13 hdd-8263/8264 installation guide the link between the pc and the chassis is a x4 pci express link. This link is a dual-simplex communication channel comprised of low-voltage, differentially driven signal pairs. The link can transmit at a rate of 10 gbps in each ...

  • Page 14: Cable Options

    Hdd-8263/8264 installation guide 14 ni.Com cable options the hdd-826x systems support only the 3 m cable length. Table 3 shows the cable available from national instruments. Specifications this section lists the system specifications for the hdd-8263 and hdd-8264 series. These specifications are typ...

  • Page 15: Operating Environment

    © national instruments corporation 15 hdd-8263/8264 installation guide operating environment ambient temperature range.................... 0 to 40 °c relative humidity range ......................... 10 to 90%, noncondensing storage environment ambient temperature range.................... –20 to 70...

  • Page 16: Ce Compliance

    Hdd-8263/8264 installation guide 16 ni.Com ce compliance this product meets the essential requirements of applicable european directives as follows: • 2006/95/ec; low-voltage directive (safety) • 2004/108/ec; electromagnetic compatibility directive (emc) online product certification refer to the pro...

  • Page 17

    © national instruments corporation 17 hdd-8263/8264 installation guide electromagnetic compatibility information this hardware has been tested and found to comply with the applicable regulatory requirements and limits for electromagnetic compatibility (emc) as indicated in the hardware’s declaration...

  • Page 18: Where to Go For Support

    Hdd-8263/8264 installation guide 18 ni.Com where to go for support the national instruments web site is your complete resource for technical support. At ni.Com/support you have access to everything from troubleshooting and application development self-help resources to email and phone assistance fro...

  • Page 19: Important Information

    © national instruments corporation 19 hdd-8263/8264 installation guide important information warranty the hdd-8263/64 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National instruments wi...

  • Page 20

    Labview, national instruments, ni, ni.Com, the national instruments corporate logo, and the eagle logo are trademarks of national instruments corporation. Refer to the trademark information at ni.Com/trademarks for other national instruments trademarks. Other product and company names mentioned here...