National Instruments HDD-8263 Installation Manual - Operating Environment
© National Instruments Corporation
15
HDD-8263/8264 Installation Guide
Operating Environment
Ambient temperature range.................... 0 to 40 °C
Relative humidity range ......................... 10 to 90%, noncondensing
Storage Environment
Ambient temperature range.................... –20 to 70 °C
Relative humidity range ......................... 5 to 95%, noncondensing
Cleaning
Clean the HDD-8263/8264 with a soft nonmetallic brush. Make sure that
the device is completely dry and free from contaminants before returning it
to service.
Safety
This product is designed to meet the requirements of the following
standards of safety for information technology equipment:
•
IEC 60950-1, EN 60950-1
•
UL 60950-1, CSA 60950-1
Note
For UL and other safety certifications, refer to the product label or the
Online
Product Certification
section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Note
For the standards applied to assess the EMC of this product, refer to the
Online
Product Certification
section.
Note
For EMC compliance, operate this device with shielded cabling.