National Instruments NI 9144 User Manual - page 7
Other manuals for NI 9144:
User Manual
Manual is about: Deterministic Ethernet Expansion Chassis for C Series Modules
of
95
NI 9144 User Guide and Specifications
|
© National Instruments
|
7
Caution
Remove any C Series I/O modules from the chassis before removing it
from the panel.
Mounting the Chassis on a DIN Rail
Caution
Remove any C Series I/O modules from the chassis before removing the
chassis from the DIN rail.
Use the NI 9915 DIN rail mount kit if you want to mount the chassis on a DIN rail. You need
one clip for mounting the chassis on a standard 35 mm DIN rail. Complete the following steps
to mount the chassis on a DIN rail:
1.
Fasten the DIN rail clip to the chassisusing a number 2 Phillips screwdriver and
two M4 × 16 screws. National Instruments provides these screws with the DIN rail
mount kit.
Figure 7.
Installing the DIN Rail Clip on the NI 9144Chassis