National Instruments PXIe-6591R Getting Started Manual - page 8
Accessing Sample Projects
NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments includes sample
projects to help you get started designing for the NI 6591R.
1.
Open LabVIEW and select Create Project.
2.
In the Create Project dialog box, select High-Speed Serial and select a sample project
for your device.
3.
Click Next.
4.
Configure the Project Name, Project Root, and File Name Prefix (Optional) fields.
5.
Click Finish.
Troubleshooting
What Should I Do if the NI 6591R Doesn't Appear in
MAX?
1.
In the MAX configuration tree, click Devices and Interfaces.
2.
Expand the Chassis tree to see the list of installed devices, and press
list.
3.
If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4.
Navigate to the Device Manager.
Operating System
Description
Windows 8.x/8
Right-click the Start screen, and select All apps»Control Panel»
Hardware and Sound»Device Manager.
Windows 7
Select Start»Control Panel»System»Hardware»Device Manager.
5.
If you are using a PXI controller, verify that a National Instruments entry appears in the
system device list. Reinstall NI LabVIEW Instrument Design Libraries for High Speed
Serial Instruments and the device if error conditions appear in the list. If you are using an
MXI controller, right-click PCI-to-PCI Bridge, and select Properties from the shortcut
menu to verify that the bridge is enabled.
Where to Go Next
Refer to the following figure for information about other product tasks and associated
resources for those tasks.
8
| ni.com | NI PXIe-6591R Getting Started Guide