National Instruments SwitchBlock Getting Started Manual - page 11
What Should I Do if the NI SwitchBlock Fails the Self-
Test in MAX?
1.
Restart the system.
2.
Launch MAX, and perform the self-test again.
3.
Power off the chassis.
4.
Reinstall the failed device in a different slot.
5.
Power on the chassis.
6.
Perform the self-test again.
Note
If the device fails the self-test again, contact NI or visit
ni.com/support
for further troubleshooting information.
Where to Go Next
DISCOVER
CREATE
LEARN
EXPLORE
custom applications within
an application programming
interface (API).
about hardware features
or review device
specifications.
the application development
environment (ADE)
for your application.
Getting Started with
LabVIEW
Getting Started with
LabWindows/CVI
NI switch device
specifications
NI Switches Help
NI Switches Help
NI-SWITCH Examples
NI-SWITCH Soft Front Panel
NI-SWITCH Instrument Driver
more about your products through ni.com.
Services
ni.com/services
Support
ni.com/switches
Updates
ni.com/updates
NI Community
ni.com/community
Located online at ni.com/manuals
Located using the NI Example Finder
Worldwide Support and Services
The NI website is your complete resource for technical support. At
ni.com/support
, you have
access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.
NI SwitchBlock
| © National Instruments | 11