Summary of Ultimate FX 12
Page 1
Owners manual get to know your kayak.
Page 2
2 seat adjustment foot rest adjustment trimming your kayak groove track anchor trolley draining cleaning and storage removing seat & seat base reinstalling seat & seat base warranty/registration pg. 3 pg. 4 pg. 5 pg. 6 pg. 7 pg. 8 pg. 9 pg. 10 pg. 11 pg. 12.
Page 3: Removing The Seat Base!
3 note: knobs should not be removed completely unless removing the seat base! Loosening both knobs 4 turns each will allow the seat to slide freely forward and back. The seat will adjust while seated. Locate the adjustment knobs the seat base is designed with a high/low seat feature. Try the low pos...
Page 4: Note: The Foot Rests
4 to adjust the foot rests to your desired length, simply grab firmly on the push/pull rod, and pull to bring closer to you or push to get a further distance. All ultimate fx models are equipped with the easy foot rest system. Note: this procedure can be done on or off of the water. It is best done ...
Page 5
5 when “trimming” your kayak you are distributing the load so that it is balanced in the water. A level waterline or a waterline with the nose slightly higher is ideal. Note: your trim in the fx 12 will vary depending on load distribution..
Page 6
6 below are just a few accessories offered for the groove track system. Call or visit your local dealer for more info. The groove track is our exclusive accessory attachment system. Components such as rod holders and depth finders slide on-off to meet your needs. You can lock them down anywhere alon...
Page 7
7 every fx12 is outfitted with 2 tight line anchor trolley systems. The system uses two pulleys and a bungee provides constant tension. Adjusting the rope allows you to change the direction you are facing without needing to reposition your anchor. Anchor (sold separately) rope should pass through la...
Page 8
8 all ultimate fx’s are equipped with a large drain hole located at the front of the boat. This is plugged with our super seal plug which creates a high pressure seal to keep water from entering. When draining an ultimate fx, remove the super seal plug, lift up on the back and allow water to go to t...
Page 9: Cleaning Your Kayak
9 all native watercraft kayaks are made from the best plastic on the market. It has the highest tensile strength, is the most abrasion resistant, and has the highest uv rating possible. With that being said we still recommend following a few simple rules when caring for your boat. Always store in a ...
Page 10
10 the seat and seat base in your fx is designed so that it may be completely removed in a few simple steps. To begin drop the seat in the low position, then push the seat as far to one side of the seat base as possible. Then lift the opposite side of the seat up and slide it out of the base and boa...
Page 11
11 reinstalling the seat and the seat base is a quick and easy process. To begin locate the approximate seat position in the boat. Insert one side of the seat base into the boat and under the rail opposite of the side that you are standing. Push down on the side that is not yet inserted until it pop...
Page 12
12 please fill out and complete your registration online at www.Nativewatercraft.Com. For warranty to be valid, the original purchaser must have registered their boat via the native watercraft website within two weeks of the purchase. Warranty is only valid to the original owner..
Page 13
13 first class seat pack tool holster rudder kit ultimate fx 12 hatch ultimate 12 bow bag ultimate smart cart.
Page 14
14.
Page 15: Www.Nativewatercraft.Com
15 thank you for purchasing a native watercraft product! Please visit our website at www.Nativewatercraft.Com there you will find more great kayaks and accessories to outfit your boat! As well as videos, photos, forums, and more information about kayak fishing. See you on the water!.
Page 16
16 www.Nativewatercraft.Com.