Naturally Filtered MG-10 User Manual

Summary of MG-10

  • Page 1

    2 blue arrows indicate water flow through mg-10. Kdf mediaguard ® – an oxidative mineral which reduces chlorine and chloramines and improves carbon life. Valve controller 5600-sxt – regulates the mg-10’s regeneration frequency and duration. Stainless steel activated carbon – reduces harmful chemical...

  • Page 2: Install Checklist

    3 important notes on installation water testing — because of variances in water quality, if your water source is a well, please contact support at 1-800-428-9419 before installation. You should have your water tested by a certified water laboratory. Water shutoff — naturally filtered will not be hel...

  • Page 3

    Plugthecontrolvalveintoan approvedgfipoweroutletus- ingthesuppliedelectricalcord; operationintheserviceposition beginsautomatically. Yourmg-10issetatthefactory defaultsettingsnotedbelow. Youcaneithercheckorchange thesettingsbyfollowingthese instructions. Note:displaywillcycleevery5to 10secondsbetwee...

  • Page 4: Installation & Testing

    After reviewing the precautions and items on the previous pages and programming the master control valve, it is time to install your new mg-10 home system. A suitable location should be selected for installation. The mg-10 is designed to be installed outdoors in an insulated enclosure on a cement sl...

  • Page 5

    9 in normal service operation, the display will alternate between time of day and days until next regeneration.When the display reaches the day and time programmed for regenera- tion the controller will trigger the regeneration cycle automatically. The default setting for the regeneration cycle is 3...