0
1 thank you for your purchase of a nauticam standard port base. At nauticam, we pride ourselves on the ability to recognise the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products. We strive to achieve a high level ...
2 1. All nauticam products are warranted against any material and manufacturing defects for one year from the date of purchase for consumer use. 2. Nauticam accepts no liability for any damage to and defects in the standard port base caused by improper use and/or poor maintenance; it is the responsi...
3 1. This standard port base is designed to be used with a nauticam housing and a nauticam compact port, please do not use this product with housings or ports of other manufacturers. 2. A water‐tight test without the camera inside the housing is highly recommended when using the system for the first...
4 specifications 4 identification of parts 5 mounting the port base on the housing 6 care and maintenance 8 construction main body: aluminium alloy surface treatment: anodised bayonet flange: polycarbonate dimensions maximum diameter: 132 mm length: 42.5 mm features target light mount: for mounting ...
5 1 target light mount 2 mounting mark 3 silicone o‐ring 3 2 1.
1. Remove the o‐ring from the port base, inspect for any damage and lightly coat it with the provided lubricant before placing it back into its groove. 2. Verify that the port opening of the housing is clean and free from foreign material. 3. Push the safety button of the port locking lever on the h...
7 y o the at the rm that tton of the ocking nd please refer to the instruction manual of the housing for guidelines to install the camera and the lens into the housing and port system..
1. Soak the port base in fresh water after each salt water use to avoid the accumulation of salt residue; wipe the port base with a towel before detaching it from the housing or the port. 2. After each day of diving, it is advisable to have the o‐ring removed from its groove and inspected for damage...
9.
