Nauticam standard port base. Instruction Manual - page 4
3
1. This standard port base is designed to be used with a NAUTICAM housing and
a NAUTICAM compact port, please do not use this product with housings or
ports of other manufacturers.
2. A water‐tight test without the camera inside the housing is highly
recommended when using the system for the first time and after the changing
of port and O‐ring(s).
3. Do not use lubricants from other brands with the silicone rubber O‐ring on this
product, only use the lubricant provided by NAUTICAM.
4. Discontinue use immediately should you notice any leakage.
5. Store the product in a robust, shock‐proof container during transportation.
6. Do not detach the product from the housing or the port in a wet or sandy
environment. Protect the interior from moisture and debris in order to
prevent malfunction or leakage.
7. Do not store the product in an environment of high humidity.
8. Do not expose the product to direct sunlight for prolonged periods.
9. Keep out of reach of children, failure to do so could result in injury.
10. Defective products should be shipped to NAUTICAM for service, unauthorized
disassembling and/or modifications could result in malfunction or leakage.