Nautilus Instinct Owner's Manual - Parts And Materials
6
NAUTILUS
INSTINCT
LEG
PRESS
/
CALF
RAISE
O
WNER
’
S
M
ANUAL
PARTS AND MATERIALS
The following parts are included with the
NAUTILUS INSTINCT LEG PRESS / CALF RAISE
:
1
Frame, Weight Stack
1
2
Frame, Main
1
3
Frame, Footrest
1
4
Frame, Seat
1
5
Crossbeam, Lower
1
6
Crossbeam, Weight Frame / Footrest
1
7
Post, Seat (factory installed)
1
8
Flywheel, Range-of-Motion
1
9
Bracket, Mounting, Flywheel Cover (factory
installed)
1
12
Crossbeam, Weight Frame / Main Frame
1
13
Cover, Flywheel
1
14
Guide Post, Seat
2
16
Plate, Top, Weight Stack
1
17
Pulley (factory installed)
6
18
Handle, Left
1
19
Handle, Right
1
23
End Cap
4
24
Cushion, Seat
1
25
Cushion, Back
1
26
Shroud, Lower, Rear
1
27
Shroud, Lower, Front
1
28
Shroud, Upper
2
29
Support, Weight Stack
2
30
Belt
1
31
Belt
1
32
Weight, 15lb
15
34
Cap, Rubber
2
35
Selector Pin
1
36
Guide Post, Weight Stack
2
37
Retainer, Belt
4
38, Nut, Tapped Hole
6
39
Washer
2
54
Screw, Button Head Socket Cap, 10X130M 8
55
Screw, Button Head Socket Cap, 10X80M
12
56
Screw, Button Head Socket Cap, 10X63M
2
57
Screw, Button Head Socket Cap, 10X35M
4
58
Screw, Button Head Socket Cap, 10X30M
2
59
Screw, Button Head Socket Cap, 10X25M
1
61
Screw
4
63
Screw, Button Head Socket Cap, 8X20M
6
66
Screw, Retaining
4
68
Lock Nut, Nylon Insert, 10M
20
70
Washer, 11M
49
72
Washer, 9M
6
73
Washer, Spring, 10M
1
T
OOLS
R
EQUIRED
Most
NAUTILUS INSTINCT
machines can be assembled using the following tools:
Metric Hex Key Wrenches - 2.5mm, 5mm, 6mm, 8mm, 10mm
Metric Open-End Wrenches - 10mm, 15mm, 17mm
Metric Ratchet Socket Wrench Set (including 17mm socket)
Torque Wrench
Channel Lock Pliers
Vice Grip Pliers
Rubber Mallet
Phillips Head Screwdriver - #2
Your
INSTINCT LEG PRESS / CALF RAISE
includes a hex key set and combination open-end wrench.
SITING REQUIREMENTS
Your
INSTINCT LEG PRESS / CALF RAISE
requires approximately 32 square feet of floor space to ensure safe operation of the unit.
UNPACKING
Your
INSTINCT LEG PRESS / CALF RAISE
is shipped in one or more shipping cartons. Each carton will generally contain one
subassembly of the entire unit. To unpack:
Remove the shipping straps from the outside of each shipping carton.
Open the top of each carton and fold back all four flaps.
Remove the packing materials, foam inserts, and ALL parts from each shipping carton. Keep the contents of each carton in a
separate area
to facilitate assembly. To ensure personal safety during assembly, place all packing materials
outside
the
assembly area.
Verify that all parts listed above are included in your shipment.
Take time now to enter your
INSTINCT LEG PRESS / CALF RAISE
serial number in the space below. If parts are missing, or if
you have any operational questions, please call Nautilus’s Service department at (800) 503-1221; have your serial number ready.
Serial No.
__________________________________________
A
SSEMBLY AND
S