D n a s n o it c u r t s n i s ’r e n w o assembly of the nautilus commercial strength system ® one ® stronger than ever ™ ® ® core fitness, exclusive manufacturer of nautilus ® commercial fitness equipment p/n 001-7178 07-24-14.
Preface thank you for purchasing a nautilus ® one ® commercial series strength system. For more than 30 years, nautilus ® has been producing the world’s finest fitness products used in health clubs and homes around the globe. We hope this product exceeds your expectations and is a valuable tool for ...
Getting started installation notice the nautilus ® one ® machines must be properly installed before being used. Core fitness recommends that you contact your dealer or sales representative when your machine arrives. The representative will help unpack, install, and demonstrate proper use of the mach...
Color tower description green wt-l-250-1 250 lb with 1 lb add-on, range limiter yellow wt-l-250-5 250 lb with 5 lb add-on, range limiter neon red wt-sys-250-1 250 lb with 1 lb add-on neon orange wt-sys-250-5 250 lb with 5 lb add-on dark blue wt-sys-385-5 385 lb with 5 lb add-on neon yellow wt-sys-42...
Assembly tower shroud and cover removal follow these instructions to remove the weight tower shrouds and top cover before installing the seat frame. Note: to prevent damage, remove all shrouds prior to removing the weight tower from the pallet and moving it to the desired location of use. Step 1. Re...
Figure 6 figure 7 step 4. Remove the inside shroud (figures 7 and 8) 4-1 adjust the selector knob to the lowest setting, and then lift it up and out of the way. Remove the center cap by carefully pressing it out of the tabs in the shroud opening; 4-2 lift the inside shroud up until the tabs stop at ...
Figure 8 figure 9 step 2. Re-install the outside shroud (figure 5) 2-1 position the outside shroud against the frame so that the tabs align with the p-slots; 2-2 carefully insert both the front and back tabs into the p-slots; 2-3 push down on the tabs until they are seated at the bottom of the p-slo...
Seat frame to weight tower assembly follow these instructions to secure the seat frame to the corresponding weight tower. Step 1. Match the seat to the tower 1-1 ensure the colored decal on the seat frame matches the colored decal on the weight tower. Note: assembling a seat frame with a non-matchin...
Selector knob badge installation 1. Ensure the selector knob is secure to the shaft and the set screw is tight; 2. Remove the adhesive backing cover from the rear of the badge; 3. Position the rear of the badge against the knob so that the slots in the badge align with the keys in the knob; 4. Secur...
If you need assistance, please have both the serial number of your machine and the date of purchase available when you call core fitness customer excellence. Technical & customer service phone: 276-773-2881 toll free: 800-235-2233 fax: 276-773-2298 e-mail: info@corehandf.Com web: www.Nautiluscommerc...
Notes 12.
